X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkmcent2.h;h=589ba615dd6ddbdd80fa58bc6fa6ac9cd38e34d0;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=51a01d860f0e0e039774337005fa1206dfdbace6;hpb=cbe607b920bc0827d8fe379ed4f5ae4e2058513e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h
index 51a01d8..589ba61 100644
--- a/include/configs/kmcent2.h
+++ b/include/configs/kmcent2.h
@@ -133,31 +133,19 @@
 #define KM_I2C_DEBLOCK_SDA	21
 
 /* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
-#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 
 #define CONFIG_RESET_VECTOR_ADDRESS	0xebfffffc
 
-#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1			/* PCIE controller 1 */
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 /* Environment in parallel NOR-Flash */
 #define CONFIG_ENV_TOTAL_SIZE		0x040000
 #define ENV_DEL_ADDR		0xebf00000	/*direct for newenv*/
 
-#define CONFIG_SYS_CLK_FREQ	66666666
-
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
-#define CONFIG_BTB			/* toggle branch predition */
-
-#define CONFIG_ENABLE_36BIT_PHYS
 
 /* POST memory regions test */
 #define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS
@@ -177,21 +165,10 @@
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_DDR_CLK_FREQ		66666666
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#define CONFIG_DDR_SPD
 
-#define CONFIG_SYS_SPD_BUS_NUM	0
 #define SPD_EEPROM_ADDRESS	0x54
 #define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
 
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR CONFIG_SYS_IVM_EEPROM_ADR
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
 /******************************************************************************
  * (PRAM usage)
  * ... -------------------------------------------------------
@@ -254,16 +231,10 @@
 #define CONFIG_SYS_CS0_FTIM3	CONFIG_SYS_NOR_FTIM3
 
 /* More NOR Flash params */
-#define CONFIG_SYS_FLASH_QUIET_TEST
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
 
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
 
 /* NAND Flash on IFC CS1*/
-#define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_NAND_BASE		0xfa000000
 #define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
 
@@ -285,8 +256,6 @@
 				CSOR_NAND_TRHZ_40    | /**/                   \
 				CSOR_NAND_BCTLD)       /**/
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 /* ONFI NAND Flash mode0 Timing Params */
 #define CONFIG_SYS_NAND_FTIM0	(FTIM0_NAND_TCCST(0x3) | \
 				FTIM0_NAND_TWP(0x8) | \
@@ -345,7 +314,6 @@
 #define CONFIG_SYS_CS2_FTIM2	SYS_QRIO_FTIM2
 #define CONFIG_SYS_CS2_FTIM3	SYS_QRIO_FTIM3
 
-#define CONFIG_MISC_INIT_F
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
@@ -359,15 +327,10 @@
 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 #define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #define CONFIG_SYS_MONITOR_LEN		0xc0000         /* 768k */
 
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
 /*
  * Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -375,7 +338,6 @@
  * Retain non-DM serial port for debug purposes.
  */
 #if !defined(CONFIG_DM_SERIAL)
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0) / 2)
@@ -423,16 +385,11 @@ int get_scl(void);
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-/* Default address of microcode for the Linux Fman driver */
-#define CONFIG_SYS_FMAN_FW_ADDR		0xE8020000
-#define CONFIG_SYS_QE_FW_ADDR		0xE8040000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
 /* Qman / Bman */
 /* RGMII (FM1@DTESC5) is local managemant interface */
 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x11
-#define CONFIG_ETHPRIME		"fm1-mac5"
 
 /*
  * Hardware Watchdog
@@ -446,7 +403,6 @@ int get_scl(void);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
 /*
  * Environment Configuration