X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkm82xx.h;h=1f9c7205aee59c44b574f886976b4d8cb348275c;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=b23cb96274d3a8ec7aab0ab34e7683ba7ca77327;hpb=aaf5e825606a70ddc8fca8e366d8c16a6fd3cc7c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index b23cb96..1f9c720 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2007-2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -29,8 +29,12 @@
 #error ("Board unsupported")
 #endif
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
 
+#define CONFIG_MISC_INIT_R
+
 /* include common defines/options for all Keymile boards */
 #include "km/keymile-common.h"
 #include "km/km-powerpc.h"
@@ -204,9 +208,6 @@
 	""
 
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
 
 #define CONFIG_SYS_MONITOR_LEN		(768 << 10)
 
@@ -227,6 +228,7 @@
 /* enable I2C and select the hardware/software driver */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_INIT_BOARD
 #define CONFIG_SYS_NUM_I2C_BUSES	3
 #define CONFIG_SYS_I2C_MAX_HOPS		1
 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
@@ -237,6 +239,7 @@
 			{0, {{I2C_MUX_PCA9542, 0x70, 1} } } }
 
 #define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_I2C_ABORT
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -271,7 +274,6 @@ int get_scl(void);
 #define CONFIG_DTT_LM75			/* ON Semi's LM75		*/
 #define CONFIG_DTT_SENSORS	{0}	/* Sensor addresses		*/
 #define CONFIG_SYS_DTT_MAX_TEMP	70
-#define CONFIG_SYS_DTT_LOW_TEMP	-30
 #define CONFIG_SYS_DTT_HYSTERESIS	3
 #define CONFIG_SYS_DTT_BUS_NUM		2
 
@@ -428,11 +430,6 @@ int get_scl(void);
 
 #define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address */
 
-/* pass open firmware flat tree */
-#define CONFIG_FIT		1
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"