X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkm%2Fpg-wcom-ls102xa.h;h=9d7a9e18d592a100de95f466fac60da92069566b;hb=0f9595b9fa68ed1634adddf989fd037909eec433;hp=75d109a88d401c233851df30b29b91b922f0c9e8;hpb=e908d20fcbd847e17345591fc171b59d9a156516;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h
index 75d109a..9d7a9e1 100644
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ b/include/configs/km/pg-wcom-ls102xa.h
@@ -6,8 +6,6 @@
 #ifndef __CONFIG_PG_WCOM_LS102XA_H
 #define __CONFIG_PG_WCOM_LS102XA_H
 
-#define CONFIG_SYS_FSL_CLK
-
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 
@@ -18,8 +16,6 @@
 					  CONFIG_KM_PHRAM + \
 					  CONFIG_KM_RESERVED_PRAM) >> 10)
 
-#define CONFIG_SYS_CLK_FREQ		66666666
-
 #define PHYS_SDRAM			0x80000000
 #define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)
 
@@ -40,7 +36,6 @@
  * IFC Definitions
  */
 /* NOR Flash Definitions */
-#define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 
@@ -73,7 +68,6 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
@@ -94,7 +88,6 @@
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
 
 /* NAND Flash Definitions */
-#define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_NAND_BASE		0x68000000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 
@@ -115,8 +108,6 @@
 					| CSOR_NAND_TRHZ_40 \
 					| CSOR_NAND_BCTLD)
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x3) | \
 					FTIM0_NAND_TWP(0x8) | \
 					FTIM0_NAND_TWCHT(0x3) | \
@@ -141,7 +132,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
 /* QRIO FPGA Definitions */
 #define CONFIG_SYS_QRIO_BASE		0x70000000
@@ -216,7 +206,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_MONITOR_LEN		0x100000     /* 1Mbyte */
-#define CONFIG_SYS_QE_FW_ADDR		0x60020000
 
 #define CONFIG_SYS_BOOTCOUNT_BE