X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkm%2Fkmp204x-common.h;h=37be3395738774e85fe8b8afada306044b7cd339;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=d981951bce50e41d7d6523b448e63fca80fe9f11;hpb=e6de55ec5bf306df3b3cc8e7a4cc17fa1e78ca6c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index d981951..37be339 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -8,9 +8,6 @@
 #ifndef _CONFIG_KMP204X_H
 #define _CONFIG_KMP204X_H
 
-#define CONFIG_PHYS_64BIT
-#define CONFIG_PPC_P2041
-
 #define CONFIG_SYS_TEXT_BASE	0xfff40000
 
 #define CONFIG_KM_DEF_NETDEV	"netdev=eth0\0"
@@ -21,8 +18,6 @@
 
 #define CONFIG_NAND_ECC_BCH
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* common KM defines */
 #include "keymile-common.h"
 
@@ -34,26 +29,20 @@
 #define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_E500MC			/* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_MP			/* support multiple processors */
 
 #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
-#define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 */
-#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_PCIE1			/* PCIE controller 1 */
+#define CONFIG_PCIE3			/* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 #define CONFIG_SYS_DPAA_RMAN		/* RMan */
 
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
 /* Environment in SPI Flash */
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -112,7 +101,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_SYS_SPD_BUS_NUM	0
@@ -211,7 +199,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_ADDR	(CONFIG_SYS_QRIO_BASE + 0x20)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
 #define CONFIG_MISC_INIT_F
 #define CONFIG_MISC_INIT_R
@@ -255,9 +242,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_KM_CONSOLE_TTY	"ttyS0"
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* I2C */
 
 #define CONFIG_SYS_I2C
@@ -288,7 +272,6 @@ int get_scl(void);
  * eSPI - Enhanced SPI
  */
 #define CONFIG_SPI_FLASH_BAR	/* 4 byte-addressing */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         20000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -360,7 +343,6 @@ int get_scl(void);
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -410,6 +392,7 @@ int get_scl(void);
 #endif
 
 #define __USB_PHY_TYPE	utmi
+#define CONFIG_USB_EHCI_FSL
 
 /*
  * Environment Configuration