X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkm%2Fkm-powerpc.h;h=84594874b88ef7fb7bc17ee56eedab93b8c08324;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=3f045f2e4afb2f56f23e9004dfcaed59d342d898;hpb=9ef671c9d4c70af3f8b21d8a31a89af4dc74d6b3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 3f045f2..8459487 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -1,38 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_KEYMILE_POWERPC_H
 #define __CONFIG_KEYMILE_POWERPC_H
 
 /* Do boardspecific init for all boards */
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
 
-#define CONFIG_BOOTCOUNT_LIMIT
-
-#define CONFIG_CMD_DTT
 #define CONFIG_JFFS2_CMDLINE
 
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
-/* standard km ethernet_present for piggy */
-#define CONFIG_KM_COMMON_ETH_INIT
-
 /* EEprom support 24C08, 24C16, 24C64 */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3  /* 8 Byte write page */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
-#define CONFIG_ENV_SIZE		0x04000		/* Size of Environment */
-#define CONFIG_FLASH_CFI_MTD
-
 #define CONFIG_SYS_MEMTEST_START 0x00100000	/* memtest works on */
 
 #define CONFIG_SYS_MEMTEST_END	0x00f00000	/* 1 ... 15 MB in DRAM	*/
@@ -57,25 +40,15 @@
 
 /* size of rootfs in RAM */
 #define CONFIG_KM_ROOTFSSIZE	0x0
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM	0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM		0x100000
-/* resereved pram area at the end of memroy [hex] */
-#define CONFIG_KM_RESERVED_PRAM	0x0
 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
  * is not valid yet, which is the case for when u-boot copies itself to RAM */
 #define CONFIG_PRAM		((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
 
-#define CONFIG_KM_CRAMFS_ADDR	0xC00000
-#define CONFIG_KM_KERNEL_ADDR	0x400000	/* 7680Kbytes */
-#define CONFIG_KM_FDT_ADDR	0xB80000	/* 512Kbytes */
-
 /* architecture specific default bootargs */
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU		""
 
 #define CONFIG_KM_DEF_ENV_CPU						\
-	"u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot="CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"update="							\
 		"protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
 		"erase " __stringify(BOOTFLASH_START) "  +${filesize} && "\