X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkm%2Fkm-powerpc.h;h=20a36fbe115e45e051b7290181cecd56d84736a6;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=2cebb2bb0cc008609b523d78f63e957705d5ccd0;hpb=509dca7a11aad394d781a9d31a7bfa6692562741;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 2cebb2b..20a36fb 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -1,42 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_KEYMILE_POWERPC_H
 #define __CONFIG_KEYMILE_POWERPC_H
 
 /* Do boardspecific init for all boards */
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
 
-#define CONFIG_BOOTCOUNT_LIMIT
-
-#define CONFIG_CMD_DTT
-#define CONFIG_JFFS2_CMDLINE
-
-/* standard km ethernet_present for piggy */
-#define CONFIG_KM_COMMON_ETH_INIT
-
-/* EEprom support 24C08, 24C16, 24C64 */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3  /* 8 Byte write page */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
-
-#define CONFIG_ENV_SIZE		0x04000		/* Size of Environment */
-#define CONFIG_FLASH_CFI_MTD
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000	/* memtest works on */
-
-#define CONFIG_SYS_MEMTEST_END	0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
-
-/* Reserve 4 MB for malloc */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+/* Increase max size of compressed kernel */
 
 /******************************************************************************
  * (PRAM usage)
@@ -53,35 +26,24 @@
 
 /* size of rootfs in RAM */
 #define CONFIG_KM_ROOTFSSIZE	0x0
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM	0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM		0x100000
-/* resereved pram area at the end of memroy [hex] */
-#define CONFIG_KM_RESERVED_PRAM	0x0
-/* enable protected RAM */
-#define CONFIG_PRAM		0
-
-#define CONFIG_KM_CRAMFS_ADDR	0x800000
-#define CONFIG_KM_KERNEL_ADDR	0x400000	/* 3968Kbytes */
-#define CONFIG_KM_FDT_ADDR	0x7E0000	/* 128Kbytes */
+/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
+ * is not valid yet, which is the case for when u-boot copies itself to RAM */
+#define CONFIG_PRAM		((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
 
 /* architecture specific default bootargs */
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU		""
 
 #define CONFIG_KM_DEF_ENV_CPU						\
-	"boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"			\
-	"cramfsloadfdt="						\
-		"cramfsload ${fdt_addr_r} "				\
-		"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"		\
-	"fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0"		\
-	"u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot="CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"update="							\
 		"protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
 		"erase " __stringify(BOOTFLASH_START) "  +${filesize} && "\
 		"cp.b ${load_addr_r} " __stringify(BOOTFLASH_START)	\
 		"  ${filesize} && "					\
 		"protect on " __stringify(BOOTFLASH_START) "  +${filesize}\0"\
+	"set_fdthigh=true\0"						\
+	"checkfdt=true\0"						\
+	"bootm_mapsize=" __stringify(CONFIG_SYS_BOOTM_LEN) "\0"		\
 	""
 
 #endif /* __CONFIG_KEYMILE_POWERPC_H */