X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkilauea.h;h=a475f97e62516d9a10d751e99261d4c3cb161e9d;hb=2fd0aad443c966ce62008225e57b18e2dcf4e330;hp=205577faa63eef8f3e1fd672ab8934dacf609fae;hpb=ec724f883ee3f3925e6c55027e8ffa70ada83303;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 205577f..a475f97 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -39,6 +39,12 @@
 #define CONFIG_405EX		1		/* Specifc 405EX support*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* ext frequency to pll	*/
 
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#define CONFIG_HOSTNAME		kilauea
+#include "amcc-common.h"
+
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
 #define CONFIG_BOARD_EMAC_COUNT
@@ -47,14 +53,10 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xFC000000
 #define CFG_NAND_ADDR		0xF8000000
 #define CFG_FPGA_BASE		0xF0000000
 #define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
-#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
-#define CFG_MONITOR_BASE	(TEXT_BASE)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & Stack Pointer Configuration Options
@@ -112,14 +114,9 @@
  * Serial Port
  *----------------------------------------------------------------------*/
 #define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SERIAL_MULTI     1
 /* define this if you want console on UART1 */
 #undef CONFIG_UART1_CONSOLE
 
-#define CFG_BAUDRATE_TABLE						\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
@@ -134,7 +131,7 @@
  * FLASH related
  *----------------------------------------------------------------------*/
 #define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
-#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
 #define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
@@ -236,46 +233,129 @@
 #define CFG_SDRAM0_MB1CF	SDRAM_RXBAS_SDBE_DISABLE
 #define CFG_SDRAM0_MB2CF	SDRAM_RXBAS_SDBE_DISABLE
 #define CFG_SDRAM0_MB3CF	SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MCOPT1	0x04322000
+#define CFG_SDRAM0_MCOPT1	(SDRAM_MCOPT1_PMU_OPEN		| \
+				 SDRAM_MCOPT1_8_BANKS		| \
+				 SDRAM_MCOPT1_DDR2_TYPE		| \
+				 SDRAM_MCOPT1_QDEP		| \
+				 SDRAM_MCOPT1_DCOO_DISABLED)
 #define CFG_SDRAM0_MCOPT2	0x00000000
-#define CFG_SDRAM0_MODT0	0x01800000
+#define CFG_SDRAM0_MODT0	(SDRAM_MODT_EB0W_ENABLE | \
+				 SDRAM_MODT_EB0R_ENABLE)
 #define CFG_SDRAM0_MODT1	0x00000000
-#define CFG_SDRAM0_CODT		0x0080f837
-#define CFG_SDRAM0_RTR		0x06180000
-#define CFG_SDRAM0_INITPLR0	0xa8380000
-#define CFG_SDRAM0_INITPLR1	0x81900400
-#define CFG_SDRAM0_INITPLR2	0x81020000
-#define CFG_SDRAM0_INITPLR3	0x81030000
-#define CFG_SDRAM0_INITPLR4	0x81010404
-#define CFG_SDRAM0_INITPLR5	0x81000542
-#define CFG_SDRAM0_INITPLR6	0x81900400
-#define CFG_SDRAM0_INITPLR7	0x8D080000
-#define CFG_SDRAM0_INITPLR8	0x8D080000
-#define CFG_SDRAM0_INITPLR9	0x8D080000
-#define CFG_SDRAM0_INITPLR10	0x8D080000
-#define CFG_SDRAM0_INITPLR11	0x81000442
-#define CFG_SDRAM0_INITPLR12	0x81010780
-#define CFG_SDRAM0_INITPLR13	0x81010400
-#define CFG_SDRAM0_INITPLR14	0x00000000
-#define CFG_SDRAM0_INITPLR15	0x00000000
-#define CFG_SDRAM0_RQDC		0x80000038
-#define CFG_SDRAM0_RFDC		0x00000209
-#define CFG_SDRAM0_RDCC		0x40000000
-#define CFG_SDRAM0_DLCR		0x030000a5
-#define CFG_SDRAM0_CLKTR	0x80000000
+#define CFG_SDRAM0_CODT		(SDRAM_CODT_RK0R_ON		| \
+				 SDRAM_CODT_CKLZ_36OHM		| \
+				 SDRAM_CODT_DQS_1_8_V_DDR2	| \
+				 SDRAM_CODT_IO_NMODE)
+#define CFG_SDRAM0_RTR		SDRAM_RTR_RINT_ENCODE(1560)
+#define CFG_SDRAM0_INITPLR0	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(80)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
+#define CFG_SDRAM0_INITPLR1	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(3)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
+#define CFG_SDRAM0_INITPLR2	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
+#define CFG_SDRAM0_INITPLR3	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3)			| \
+		SDRAM_INITPLR_IMA_ENCODE(0))
+#define CFG_SDRAM0_INITPLR4	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
+					 JEDEC_MA_EMR_RTT_75OHM))
+#define CFG_SDRAM0_INITPLR5	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
+					 JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
+					 JEDEC_MA_MR_BLEN_4 | \
+					 JEDEC_MA_MR_DLL_RESET))
+#define CFG_SDRAM0_INITPLR6	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(3)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)		| \
+		SDRAM_INITPLR_IBA_ENCODE(0x0)				| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
+#define CFG_SDRAM0_INITPLR7	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CFG_SDRAM0_INITPLR8	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CFG_SDRAM0_INITPLR9	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CFG_SDRAM0_INITPLR10	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CFG_SDRAM0_INITPLR11	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
+					 JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
+					 JEDEC_MA_MR_BLEN_4))
+#define CFG_SDRAM0_INITPLR12	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER	| \
+					 JEDEC_MA_EMR_RDQS_DISABLE | \
+					 JEDEC_MA_EMR_DQS_DISABLE | \
+					 JEDEC_MA_EMR_RTT_DISABLED | \
+					 JEDEC_MA_EMR_ODS_NORMAL))
+#define CFG_SDRAM0_INITPLR13	(SDRAM_INITPLR_ENABLE			| \
+		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
+		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
+		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)			| \
+		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
+					 JEDEC_MA_EMR_RDQS_DISABLE | \
+					 JEDEC_MA_EMR_DQS_DISABLE | \
+					 JEDEC_MA_EMR_RTT_DISABLED | \
+					 JEDEC_MA_EMR_ODS_NORMAL))
+#define CFG_SDRAM0_INITPLR14	(SDRAM_INITPLR_DISABLE)
+#define CFG_SDRAM0_INITPLR15	(SDRAM_INITPLR_DISABLE)
+#define CFG_SDRAM0_RQDC		(SDRAM_RQDC_RQDE_ENABLE | \
+				 SDRAM_RQDC_RQFD_ENCODE(56))
+#define CFG_SDRAM0_RFDC		SDRAM_RFDC_RFFD_ENCODE(521)
+#define CFG_SDRAM0_RDCC		(SDRAM_RDCC_RDSS_T2)
+#define CFG_SDRAM0_DLCR		(SDRAM_DLCR_DCLM_AUTO		| \
+				 SDRAM_DLCR_DLCS_CONT_DONE	| \
+				 SDRAM_DLCR_DLCV_ENCODE(165))
+#define CFG_SDRAM0_CLKTR	(SDRAM_CLKTR_CLKP_180_DEG_ADV)
 #define CFG_SDRAM0_WRDTR	0x00000000
-#define CFG_SDRAM0_SDTR1	0x80201000
-#define CFG_SDRAM0_SDTR2	0x32204232
-#define CFG_SDRAM0_SDTR3	0x080b0d1a
-#define CFG_SDRAM0_MMODE	0x00000442
-#define CFG_SDRAM0_MEMODE	0x00000404
+#define CFG_SDRAM0_SDTR1	(SDRAM_SDTR1_LDOF_2_CLK	| \
+				 SDRAM_SDTR1_RTW_2_CLK	| \
+				 SDRAM_SDTR1_RTRO_1_CLK)
+#define CFG_SDRAM0_SDTR2	(SDRAM_SDTR2_RCD_3_CLK		| \
+				 SDRAM_SDTR2_WTR_2_CLK		| \
+				 SDRAM_SDTR2_XSNR_32_CLK	| \
+				 SDRAM_SDTR2_WPC_4_CLK		| \
+				 SDRAM_SDTR2_RPC_2_CLK		| \
+				 SDRAM_SDTR2_RP_3_CLK		| \
+				 SDRAM_SDTR2_RRD_2_CLK)
+#define CFG_SDRAM0_SDTR3	(SDRAM_SDTR3_RAS_ENCODE(8)	| \
+				 SDRAM_SDTR3_RC_ENCODE(11)	| \
+				 SDRAM_SDTR3_XCS		| \
+				 SDRAM_SDTR3_RFC_ENCODE(26))
+#define CFG_SDRAM0_MMODE	(SDRAM_MMODE_WR_DDR2_3_CYC | \
+				 SDRAM_MMODE_DCL_DDR2_4_0_CLK | \
+				 SDRAM_MMODE_BLEN_4)
+#define CFG_SDRAM0_MEMODE	(SDRAM_MEMODE_DQS_DISABLE | \
+				 SDRAM_MEMODE_RTT_75OHM)
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
 
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
 #define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
@@ -295,7 +375,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_M88E1111_PHY	1
 #define CONFIG_IBM_EMAC4_V4	1
-#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_EMAC_PHY_MODE	EMAC_PHY_MODE_RGMII_RGMII
 #define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
 
 #define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
@@ -303,102 +383,33 @@
 
 #define CONFIG_HAS_ETH0		1
 
-#define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR	2
 
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
+/*
+ * Default environment variables
+ */
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_PPC_OLD					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	CONFIG_AMCC_DEF_ENV_NAND_UPD					\
 	"logversion=2\0"						\
-	"netdev=eth0\0"							\
-	"hostname=kilauea\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_self_old=run ramargs addip addtty;"			\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"flash_nfs_old=run nfsargs addip addtty;"			\
-		"bootm ${kernel_addr}\0"				\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
-		"run nfsargs addip addtty;bootm ${kernel_addr_r}\0"	\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"tftp ${fdt_addr_r} ${fdt_file}; "			\
-		"run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"rootpath=/opt/eldk/ppc_4xx\0"					\
-	"bootfile=kilauea/uImage\0"					\
-	"fdt_file=kilauea/kilauea.dtb\0"				\
-	"kernel_addr_r=400000\0"					\
-	"fdt_addr_r=800000\0"						\
 	"kernel_addr=fc000000\0"					\
 	"fdt_addr=fc1e0000\0"						\
 	"ramdisk_addr=fc200000\0"					\
-	"initrd_high=30000000\0"					\
-	"load=tftp 200000 kilauea/u-boot.bin\0"				\
-	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
-		"cp.b ${fileaddr} fffa0000 ${filesize};"		\
-		"setenv filesize;saveenv\0"				\
-	"upd=run load update\0"						\
-	"nload=tftp 200000 kilauea/u-boot-nand.bin\0"			\
-	"nupdate=nand erase 0 60000;nand write 200000 0 60000;"		\
-		"setenv filesize;saveenv\0"				\
-	"nupd=run nload nupdate\0"					\
 	"pciconfighost=1\0"						\
 	"pcie_mode=RP:RP\0"						\
 	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
 
 /*
- * Command line configuration.
+ * Commands additional to the ones defined in amcc-common.h
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_LOG
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 
 /* POST support */
@@ -417,37 +428,6 @@
 
 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
-#else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
-#endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
-
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *----------------------------------------------------------------------*/
@@ -476,13 +456,6 @@
 /* base address of inbound PCIe window */
 #define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
 
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
@@ -556,19 +529,6 @@
 }												\
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*-----------------------------------------------------------------------
  * Some Kilauea stuff..., mainly fpga registers
  */
@@ -604,8 +564,4 @@
 #define CFG_FPGA_USER_LED0		0x00000200
 #define CFG_FPGA_USER_LED1		0x00000100
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #endif	/* __CONFIG_H */