X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkatmai.h;h=3f39a26d3ba01e7e510d402f63c37b2c7d1e837e;hb=5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f;hp=135a4c26aa4cc80a2aa07e2885204026a662d5ab;hpb=6d8d4ef994a7c46e34b5fe53b1af7aa4f78192bf;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 135a4c2..3f39a26 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -4,23 +4,7 @@ * * (C) Copyright 2004 Paul Reynolds * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /************************************************************************ @@ -34,7 +18,6 @@ * High Level Configuration Options *----------------------------------------------------------------------*/ #define CONFIG_KATMAI 1 /* Board is Katmai */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ #define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ @@ -46,7 +29,6 @@ /* * Enable this board for more than 2GB of SDRAM */ -#define CONFIG_PHYS_64BIT #define CONFIG_VERY_BIG_RAM /* @@ -55,7 +37,6 @@ #define CONFIG_HOSTNAME katmai #include "amcc-common.h" -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- @@ -96,10 +77,9 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- @@ -120,15 +100,13 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 -#define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ #define IIC0_BOOTPROM_ADDR 0x50 #define IIC0_ALT_BOOTPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0x50) #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 @@ -145,31 +123,6 @@ #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */ -/* I2C DTT */ -#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ -#define CONFIG_SYS_DTT_BUS_NUM 1 /* The I2C bus for DTT */ -/* - * standard dtt sensor configuration - bottom bit will determine local or - * remote sensor of the ADM1021, the rest determines index into - * CONFIG_SYS_DTT_ADM1021 array below. - */ -#define CONFIG_DTT_SENSORS { 0, 1 } - -/* - * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). - * there will be one entry in this array for each two (dummy) sensors in - * CONFIG_DTT_SENSORS. - * - * For Katmai board: - * - only one ADM1021 - * - i2c addr 0x18 - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT ouput disabled - * - local temp sensor enabled, min set to 0 deg, max set to 85 deg - * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg - */ -#define CONFIG_SYS_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} } - /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ @@ -192,14 +145,8 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CHIP_CONFIG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ECCTEST -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP #define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ @@ -238,8 +185,7 @@ *----------------------------------------------------------------------- */ /* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE @@ -263,7 +209,6 @@ #define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */ #define CONFIG_SYS_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */ #define CONFIG_SYS_SYSTEMACE_BASE CONFIG_SYS_ACE_BASE -#define CONFIG_DOS_PARTITION 1 /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup