X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkatmai.h;h=2a7ab8de0ee8c95f85c344bebe8769324c188e45;hb=fc21cd552bf7845fd2002e7a090d53ee5d12d335;hp=ea6cf0d23fc1b30273b16bf9bd7e127a631b2003;hpb=cb5473205206c7f14cbb1e747f28ec75b48826e2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index ea6cf0d..2a7ab8d 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -37,6 +37,7 @@
 #define CONFIG_4xx			1	/* ... PPC4xx family	*/
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 
@@ -45,7 +46,6 @@
  */
 #define CONFIG_PHYS_64BIT
 #define	CONFIG_VERY_BIG_RAM
-#define CONFIG_MAX_MEM_MAPPED	((phys_size_t)2 << 30)
 
 /*
  * Include common defines/options for all AMCC eval boards
@@ -53,13 +53,6 @@
 #define CONFIG_HOSTNAME		katmai
 #include "amcc-common.h"
 
-/*
- * For booting 256K-paged Linux we should have 16MB of memory
- * for Linux initial memory map
- */
-#undef CONFIG_SYS_BOOTMAPSZ
-#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)
-
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_pre_init		*/
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
@@ -130,7 +123,6 @@
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
 
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
@@ -142,6 +134,11 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x50
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		8
+
 /* I2C RTC */
 #define CONFIG_RTC_M41T11	1
 #define CONFIG_SYS_RTC_BUS_NUM		1	/* The I2C bus for RTC		*/
@@ -184,11 +181,10 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_AMCC_DEF_ENV						\
 	CONFIG_AMCC_DEF_ENV_POWERPC					\
-	CONFIG_AMCC_DEF_ENV_PPC_OLD					\
 	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
-	"kernel_addr=fff10000\0"					\
-	"ramdisk_addr=fff20000\0"					\
-	"kozio=bootm ffc60000\0"					\
+	"kernel_addr=ff000000\0"					\
+	"fdt_addr=ff1e0000\0"						\
+	"ramdisk_addr=ff200000\0"					\
 	"pciconfighost=1\0"						\
 	"pcie_mode=RP:RP:RP\0"						\
 	""
@@ -196,8 +192,11 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECCTEST
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SNTP