X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fj721e_evm.h;h=9f54f259994a94fc2f252f52ec7ea5c624cd3884;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=5aaa31eaa152f3fb336bbaf99ea5ef2256c9403d;hpb=a30dc99b5574531db9d33bfcc1fc27f11f84a4fd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index 5aaa31e..9f54f25 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -17,48 +17,17 @@
 
 /* DDR Configuration */
 #define CONFIG_SYS_SDRAM_BASE1		0x880000000
+/* FLASH Configuration */
+#define CONFIG_SYS_FLASH_BASE		0x000000000
 
 /* SPL Loader Configuration */
 #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +	\
-					 CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
 #define CONFIG_SYS_UBOOT_BASE		0x50280000
 /* Image load address in RAM for DFU boot*/
 #else
 #define CONFIG_SYS_UBOOT_BASE		0x50080000
-/*
- * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
- * possible (to allow the build to go through), as this directly affects
- * our memory footprint. The less we use for BSS the more we have available
- * for everything else.
- */
-#define CONFIG_SPL_BSS_MAX_SIZE		0xA000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
-/* Set the stack right below the SPL BSS section */
-#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
-/* Configure R5 SPL post-relocation malloc pool in DDR */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_16M
-/* Image load address in RAM for DFU boot*/
-#endif
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"tispl.bin"
 #endif
 
-#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M
-#define CONFIG_CQSPI_REF_CLK		133333333
-
 /* HyperFlash related configuration */
 
 /* U-Boot general configuration */
@@ -180,14 +149,6 @@
 	DFU_ALT_INFO_RAM \
 	DFU_ALT_INFO_OSPI
 
-#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
-#define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD				\
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
-#else
-#define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
-#endif
-
 #if CONFIG_IS_ENABLED(CMD_PXE)
 # define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
 #else
@@ -218,7 +179,6 @@
 	EXTRA_ENV_RPROC_SETTINGS					\
 	EXTRA_ENV_DFUARGS						\
 	DEFAULT_UFS_TI_ARGS						\
-	EXTRA_ENV_J721E_BOARD_SETTINGS_MTD				\
 	EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY				\
 	BOOTENV