X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fixdp425.h;h=b7c43fedf324428aa6a9a2e0146a9b7072f331bc;hb=29f8f58ff40c67f7f2e11afd1715173094e52ac2;hp=a8067f6ef2ae5ad756e4fe31acbdf9f3242097a4;hpb=400558b561e2bdb47f87b96b3510dda0881a3662;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index a8067f6..b7c43fe 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -33,16 +33,13 @@
 #define CONFIG_IXP425           1       /* This is an IXP425 CPU    */
 #define CONFIG_IXDP425          1       /* on an IXDP425 Board      */
 
+#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
+#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
+
 /***************************************************************
  * U-boot generic defines start here.
  ***************************************************************/
 
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL
-
 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
 
 /*
@@ -56,14 +53,28 @@
 
 #define CONFIG_BAUDRATE         115200
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_ELF | CFG_CMD_PCI)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PCI
+
 
 #define CONFIG_PCI
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-/* These are u-boot generic parameters */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY        3
 /*#define CONFIG_ETHADDR          08:00:3e:26:0a:5b*/
@@ -74,7 +85,7 @@
 #define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
 #define CONFIG_CMDLINE_TAG
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
 #endif
@@ -141,6 +152,8 @@
 #define CFG_DRAM_SIZE           0x01000000
 
 #define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 
 /*
  * Expansion bus settings
@@ -152,7 +165,7 @@
  */
 #define CFG_SDR_CONFIG		0xd
 #define CFG_SDR_MODE_CONFIG	0x1
-#define CFG_SDRAM_REFRESH_CNT 	0x81a
+#define CFG_SDRAM_REFRESH_CNT	0x81a
 
 /*
  * GPIO settings
@@ -161,16 +174,27 @@
 /*
  * FLASH and environment organization
  */
+/*
+ * FLASH and environment organization
+ */
 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT      128  	/* max number of sectors on one chip    */
+#define CFG_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
+
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+#define	CFG_ENV_IS_IN_FLASH	1
+
+#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
+
+#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT    (25*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-/* FIXME */
-#define	CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x20000)        /* Addr of Environment Sector   */
-#define CFG_ENV_SIZE            0x20000  /* Total Size of Environment Sector     */
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 #endif  /* __CONFIG_H */