X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fipek01.h;h=3bd938efd927ce15e8b47b5ae478ccf73361d664;hb=4ddc981225288e68d45eb8e33271d1481920086f;hp=50fd995657364b052e24bd5fb50f419040b6321f;hpb=aaf5e825606a70ddc8fca8e366d8c16a6fd3cc7c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index 50fd995..3bd938e 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -5,7 +5,7 @@
  * (C) Copyright 2009
  * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,9 +16,8 @@
  */
 
 #define CONFIG_MPC5200
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPX5200		1	/* ... on MPX5200 board */
-#define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM */
+#define CONFIG_MPX5200		1	/* MPX5200 board */
+#define CONFIG_MPC5200_DDR	1	/* use DDR RAM */
 #define CONFIG_IPEK01           	/* Motherboard is ipek01 */
 
 #define	CONFIG_SYS_TEXT_BASE	0xfc000000
@@ -44,18 +43,12 @@
 /*
  * Video configuration for LIME GDC
  */
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_MB862xx
 #define CONFIG_VIDEO_MB862xx_ACCEL
 #define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */
@@ -70,8 +63,6 @@
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1
 #define CONFIG_PCI_SCAN_SHOW	1
 
 #define CONFIG_PCI_MEM_BUS	0x40000000
@@ -92,7 +83,6 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		MPC5XXX_USB
@@ -102,27 +92,19 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #ifdef CONFIG_VIDEO
 #define CONFIG_CMD_BMP		/* BMP support */
 #endif
 #define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
-#define CONFIG_CMD_DHCP		/* DHCP Support */
-#define CONFIG_CMD_FAT		/* FAT support */
-#define CONFIG_CMD_I2C		/* I2C serial bus support */
 #define CONFIG_CMD_IDE		/* IDE harddisk support */
 #define CONFIG_CMD_IRQ		/* irqinfo */
-#define CONFIG_CMD_MII		/* MII support */
 #define CONFIG_CMD_PCI		/* pciinfo */
-#define CONFIG_CMD_USB		/* USB Support */
 
 #define CONFIG_SYS_LOWBOOT	1
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -172,9 +154,6 @@
 /*
  * Open firmware flat tree support
  */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
@@ -278,7 +257,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
@@ -297,9 +275,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
-#define CONFIG_SYS_HZ			1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_LOOPW
-
 /*
  * Various low-level settings
  */