X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fipek01.h;h=126e02e40fac9067f53a8f4af3689e68f686db5f;hb=12f05678e157ef4472b4e3611bb7ae9751487ff0;hp=3f6f8dd0afbc6479bdfbde3e111caa1e71faafc0;hpb=632093b566569329bc6e5b0893bdca01de905314;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index 3f6f8dd..126e02e 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -19,7 +19,6 @@
 #define CONFIG_MPX5200		1	/* MPX5200 board */
 #define CONFIG_MPC5200_DDR	1	/* use DDR RAM */
 #define CONFIG_IPEK01           	/* Motherboard is ipek01 */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0xfc000000
@@ -93,7 +92,6 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		MPC5XXX_USB
@@ -107,21 +105,15 @@
 #define CONFIG_CMD_BMP		/* BMP support */
 #endif
 #define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
-#define CONFIG_CMD_DHCP		/* DHCP Support */
-#define CONFIG_CMD_FAT		/* FAT support */
-#define CONFIG_CMD_I2C		/* I2C serial bus support */
 #define CONFIG_CMD_IDE		/* IDE harddisk support */
 #define CONFIG_CMD_IRQ		/* irqinfo */
-#define CONFIG_CMD_MII		/* MII support */
 #define CONFIG_CMD_PCI		/* pciinfo */
-#define CONFIG_CMD_USB		/* USB Support */
 
 #define CONFIG_SYS_LOWBOOT	1
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -171,9 +163,6 @@
 /*
  * Open firmware flat tree support
  */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
@@ -295,8 +284,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
-#define CONFIG_LOOPW
-
 /*
  * Various low-level settings
  */