X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fipam390.h;h=d2fc81bfe0b810bd62c436ad5c75e9dc1abbc121;hb=a6dd10c70be9be863488d9d7afede057a4d99823;hp=13c9d5619d82262c3e01248eab5ebb2542fdc4ab;hpb=f519b3649156ee6d7945f7003cf8934bd9b39f1e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 13c9d56..d2fc81b 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -32,7 +32,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 
 /*
@@ -135,14 +134,11 @@
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
 /*
  * Flash & Environment
  */
 #define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET		0x0 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_SIZE			(128 << 10)
 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
@@ -199,7 +195,6 @@
  * U-Boot general configuration
  */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -209,7 +204,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -242,13 +236,6 @@
 		"nand write c0000100 180000 20000\0"		\
 	"\0"
 
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SAVES
-
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
@@ -256,15 +243,8 @@
 #ifndef CONFIG_DRIVER_TI_EMAC
 #endif
 
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_LZO
-#define CONFIG_RBTREE
-#define CONFIG_CMD_UBIFS
 
 #define MTDIDS_NAME_STR		"davinci_nand.0"
 #define MTDIDS_DEFAULT		"nand0=" MTDIDS_NAME_STR
@@ -278,11 +258,9 @@
 
 /* defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
 						CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000
 #define CONFIG_SPL_MAX_SIZE	0x20000
@@ -295,11 +273,8 @@
 					GENERATED_GBL_DATA_SIZE)
 
 /* add FALCON boot mode */
-#define CONFIG_CMD_SPL
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000
 #define CONFIG_SYS_SPL_ARGS_ADDR	LINUX_BOOT_PARAM_ADDR
-#define CONFIG_CMD_SPL_NAND_OFS		0x00180000
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x400
 
 /* GPIO support */
 #define CONFIG_DA8XX_GPIO
@@ -309,4 +284,6 @@
 #define CONFIG_IPAM390_GPIO_LED_RED	((16 * 7) + 11)
 #define CONFIG_IPAM390_GPIO_LED_GREEN	((16 * 7) + 12)
 
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */