X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fintip.h;h=f1f840923b017e9a33a6df7150508299859a140a;hb=cb33bda44f4bbf6fb58adf41dced313ca38da6fc;hp=ed96b1b3c44da058d386ec83b1b99cfdf94bed62;hpb=348e47f766ac228fb02d1af562b2e9a4c69355db;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/intip.h b/include/configs/intip.h
index ed96b1b..f1f8409 100644
--- a/include/configs/intip.h
+++ b/include/configs/intip.h
@@ -6,20 +6,7 @@
  * (C) Copyright 2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -37,13 +24,10 @@
 #define CONFIG_460EX		1	/* Specific PPC460EX		*/
 #ifdef CONFIG_DEVCONCENTER
 #define CONFIG_HOSTNAME		devconcenter
-#define CONFIG_IDENT_STRING	" devconcenter 0.06"
 #else
 #define CONFIG_HOSTNAME		intip
-#define CONFIG_IDENT_STRING	" intip 0.06"
 #endif
 #define CONFIG_440		1
-#define CONFIG_4xx		1	/* ... PPC4xx family */
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xFFFA0000
@@ -56,17 +40,11 @@
 
 #define CONFIG_SYS_CLK_FREQ	66666667	/* external freq to pll	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
 #define CONFIG_BOARD_EARLY_INIT_R	1	/* Call board_early_init_r */
 #define CONFIG_MISC_INIT_R		1	/* Call misc_init_r */
 #define CONFIG_BOARD_TYPES		1	/* support board types */
-#define CONFIG_FIT
 #define CFG_ALT_MEMTEST
 
-#undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
-#define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -228,9 +206,8 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
@@ -271,7 +248,6 @@
  * USB-OHCI
  */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #undef CONFIG_SYS_OHCI_BE_CONTROLLER	/* 460EX has little endian descriptors*/
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	/* 460EX has little endian register */
 #define CONFIG_SYS_OHCI_USE_NPS		/* force NoPowerSwitching mode */
@@ -296,28 +272,17 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CHIP_CONFIG
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DTT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_USB
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /*
  * PCI stuff
  */
 /* General PCI */
-#define CONFIG_PCI			/* include pci support	        */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_PCI_DISABLE_PCIE
@@ -329,7 +294,6 @@
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
-
 /*
  * External Bus Controller (EBC) Setup
  */
@@ -344,7 +308,6 @@
  * 0xfc00.0000 -> 4.cc00.0000
  */
 
-
 /* Memory Bank 0 (NOR-FLASH) initialization */
 #define CONFIG_SYS_EBC_PB0AP		0x10055e00
 #define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)