X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fintip.h;h=036fd20eb46a0f9373c13c3b1338277d06b6e544;hb=d4db3b86a5e090e21db710bedbbe3e50d4c56428;hp=d3d7a441b6b307c7a512ed18829c4b9019b27e9f;hpb=326ea986ac150acdc7656d57fca647db80b50158;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/intip.h b/include/configs/intip.h
index d3d7a44..036fd20 100644
--- a/include/configs/intip.h
+++ b/include/configs/intip.h
@@ -24,13 +24,10 @@
 #define CONFIG_460EX		1	/* Specific PPC460EX		*/
 #ifdef CONFIG_DEVCONCENTER
 #define CONFIG_HOSTNAME		devconcenter
-#define CONFIG_IDENT_STRING	" devconcenter 0.06"
 #else
 #define CONFIG_HOSTNAME		intip
-#define CONFIG_IDENT_STRING	" intip 0.06"
 #endif
 #define CONFIG_440		1
-#define CONFIG_4xx		1	/* ... PPC4xx family */
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xFFFA0000
@@ -43,17 +40,11 @@
 
 #define CONFIG_SYS_CLK_FREQ	66666667	/* external freq to pll	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
 #define CONFIG_BOARD_EARLY_INIT_R	1	/* Call board_early_init_r */
 #define CONFIG_MISC_INIT_R		1	/* Call misc_init_r */
 #define CONFIG_BOARD_TYPES		1	/* support board types */
-#define CONFIG_FIT
 #define CFG_ALT_MEMTEST
 
-#undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
-#define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -217,7 +208,6 @@
  */
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
@@ -228,13 +218,6 @@
 #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
 #define CONFIG_4xx_CONFIG_BLOCKSIZE		16
 
-/* I2C SYSMON */
-#define CONFIG_DTT_LM63         1       /* National LM63        */
-#define CONFIG_DTT_SENSORS      { 0 }   /* Sensor addresses     */
-#define CONFIG_DTT_PWM_LOOKUPTABLE      \
-	{ { 40, 10 }, { 50, 20 }, { 60, 40 } }
-#define CONFIG_DTT_TACH_LIMIT   0xa10
-
 /* RTC configuration */
 #define CONFIG_RTC_DS1337	1
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
@@ -258,7 +241,6 @@
  * USB-OHCI
  */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #undef CONFIG_SYS_OHCI_BE_CONTROLLER	/* 460EX has little endian descriptors*/
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	/* 460EX has little endian register */
 #define CONFIG_SYS_OHCI_USE_NPS		/* force NoPowerSwitching mode */
@@ -283,28 +265,16 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CHIP_CONFIG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_USB
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /*
  * PCI stuff
  */
 /* General PCI */
-#define CONFIG_PCI			/* include pci support	        */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_PCI_DISABLE_PCIE
@@ -316,7 +286,6 @@
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
-
 /*
  * External Bus Controller (EBC) Setup
  */
@@ -331,7 +300,6 @@
  * 0xfc00.0000 -> 4.cc00.0000
  */
 
-
 /* Memory Bank 0 (NOR-FLASH) initialization */
 #define CONFIG_SYS_EBC_PB0AP		0x10055e00
 #define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)