X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fintegratorcp.h;h=596e4ff8c3bfc4322bb658e0f5874a6d35d9d1a9;hb=6786ce1ce14feb4d02854a0c04bc0cce505be46e;hp=d6f260287534338532c50c0b8157b361ba76b91d;hpb=6f43ba70d15e15a08c25b3d956c70addb6740737;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index d6f2602..596e4ff 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2003
  * Texas Instruments.
@@ -8,8 +9,6 @@
  * ARM Ltd.
  * Philippe Robin, <philippe.robin@arm.com>
  * Configuration for Compact Integrator board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,71 +17,11 @@
 #include "integrator-common.h"
 
 /* Integrator CP-specific configuration */
-#define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE    0xC8000000
-#undef CONFIG_SMC91111_EXT_PHY
-
-/* PL011 configuration */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK	14745600
-#define CONFIG_PL01x_PORTS	{ (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_CONS_INDEX	0
-#define CONFIG_BAUDRATE		38400
-#define CONFIG_SYS_SERIAL0		0x16000000
-#define CONFIG_SYS_SERIAL1		0x17000000
-
-/*
- * Command line configuration.
- */
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS	"root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
-#define CONFIG_SERVERIP 192.168.1.100
-#define CONFIG_IPADDR 192.168.1.104
-#define CONFIG_BOOTFILE "uImage"
+#define CFG_SYS_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
-
 #define PHYS_FLASH_SIZE			0x01000000	/* 16MB */
-#define CONFIG_SYS_MAX_FLASH_SECT	64
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_SYS_MONITOR_LEN		0x00100000
-
-/*
- * Move up the U-Boot & monitor area if more flash is fitted.
- * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
- * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
- * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
- * embedded in the boot monitor(s) area
- */
-#if ( PHYS_FLASH_SIZE == 0x04000000 )
-
-#define CONFIG_ENV_ADDR		0x27F00000
-#define CONFIG_SYS_MONITOR_BASE	0x27F40000
-
-#elif (PHYS_FLASH_SIZE == 0x02000000 )
-
-#define CONFIG_ENV_ADDR		0x25F00000
-#define CONFIG_SYS_MONITOR_BASE	0x25F40000
-
-#else
-
-#define CONFIG_ENV_ADDR		0x24F00000
-#define CONFIG_SYS_MONITOR_BASE	0x27F40000
-
-#endif
-
-#define CONFIG_ENV_SECT_SIZE	0x40000		/* 256KB */
-#define CONFIG_ENV_SIZE		8192		/* 8KB */
 
 #endif /* __CONFIG_H */