X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fintegratorap.h;h=49f07e997d837c546b62154d0311a2432f853c0f;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=edea769a921dd8c58fde863abb021b08d92fcceb;hpb=3765b3e7bd0f8e46914d417f29cbcb0c72b1acf7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index edea769..49f07e9 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2003
  * Texas Instruments.
@@ -8,8 +9,6 @@
  * ARM Ltd.
  * Philippe Robin, <philippe.robin@arm.com>
  * Configuration for Integrator AP board.
- *.
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,80 +17,14 @@
 #include "integrator-common.h"
 
 /* Integrator/AP-specific configuration */
-#define CONFIG_ARCH_INTEGRATOR
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
 
-/*
- * PL010 Configuration
- */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX	0
-#define CONFIG_BAUDRATE		38400
-#define CONFIG_PL01x_PORTS	{ (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
-#define CONFIG_SYS_SERIAL0		0x16000000
-#define CONFIG_SYS_SERIAL1		0x17000000
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 console=ttyAM0 console=tty"
-#define CONFIG_BOOTCOMMAND	""
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
-
-#define CONFIG_SYS_FLASH_BASE	0x24000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
+/* Flash settings */
+#define CONFIG_SYS_FLASH_SIZE		0x02000000 /* 32 MiB */
 #define CONFIG_SYS_MAX_FLASH_SECT	128
-#define CONFIG_ENV_SIZE			32768
-
 
 /*-----------------------------------------------------------------------
  * PCI definitions
  */
 
-#define CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-
-#define CONFIG_NET_MULTI
-#define CONFIG_TULIP
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
-
-
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- *   to define the necessary CONFIG_ s for the CM involved
- * see e.g. integratorcp_CM926EJ-S_config
- */
-#include "armcoremodule.h"
-
 #endif	/* __CONFIG_H */