X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8ulp_evk.h;h=d77510e1685e45a3709459cc6c9010a6d269e806;hb=6786ce1ce14feb4d02854a0c04bc0cce505be46e;hp=3d506ba37f3dc49e8e92fba943dc6ad00423ddb8;hpb=5523afbe4a63aa4929cfb857c874178b0c452742;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h
index 3d506ba..d77510e 100644
--- a/include/configs/imx8ulp_evk.h
+++ b/include/configs/imx8ulp_evk.h
@@ -9,38 +9,19 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		(SZ_64M)
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SYS_UBOOT_BASE	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+#define CFG_SYS_UBOOT_BASE	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x22050000
-#define CONFIG_SPL_BSS_START_ADDR	0x22048000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x2000	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x22040000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x8000	/* 32 KB */
+#define CFG_MALLOC_F_ADDR		0x22040000
 
-#define CONFIG_MALLOC_F_ADDR		0x22040000
-
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */
 
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 /* ENET Config */
 #if defined(CONFIG_FEC_MXC)
-#define CONFIG_ETHPRIME                 "FEC"
 #define PHY_ANEG_TIMEOUT		20000
 
-#define CONFIG_FEC_XCV_TYPE		RMII
-#define CONFIG_FEC_MXC_PHYADDR		1
-
-#define IMX_FEC_BASE			0x29950000
+#define CFG_FEC_MXC_PHYADDR		1
 #endif
 
 #ifdef CONFIG_DISTRO_DEFAULTS
@@ -53,7 +34,7 @@
 #endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+#define CFG_EXTRA_ENV_SETTINGS		\
 	BOOTENV \
 	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
@@ -64,30 +45,19 @@
 	"fdtfile=imx8ulp-evk.dtb\0" \
 	"initrd_addr=0x83800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
 
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR	0x80000000
+#define CFG_SYS_INIT_RAM_SIZE	0x80000
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_MMCROOT			"/dev/mmcblk2p2"
 
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CFG_SYS_SDRAM_BASE		0x80000000
 #define PHYS_SDRAM			0x80000000
 #define PHYS_SDRAM_SIZE			0x80000000 /* 2GB DDR */
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Using ULP WDOG for reset */
 #define WDOG_BASE_ADDR			WDG3_RBASE
 #endif