X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8qxp_mek.h;h=f8ec16ebb197bbfa9c1fc38a29b419b808353053;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=a58f68c17e6cbc6be4c4ffdb97cff523100f6a04;hpb=e985eb14ac5cff260321519a309f540909b77c16;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index a58f68c..f8ec16e 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -11,43 +11,13 @@ #include #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" -#define CONFIG_SPL_STACK 0x013E000 -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 #define CONFIG_MALLOC_F_ADDR 0x00120000 -#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE - -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#define CONFIG_OF_EMBED #endif -#define CONFIG_REMAKE_ELF - -#define CONFIG_BOARD_EARLY_INIT_F - -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define USDHC1_BASE_ADDR 0x5B010000 -#define USDHC2_BASE_ADDR 0x5B020000 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - #ifdef CONFIG_AHAB_BOOT #define AHAB_ENV "sec_boot=yes\0" #else @@ -68,8 +38,8 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ @@ -129,44 +99,11 @@ "fi;" \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if test ${sec_boot} = yes; then " \ - "if run loadcntr; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ -#define CONFIG_LOADADDR 0x80280000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* Default environment is in SD */ -#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ -#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM_1 0x80000000 @@ -175,23 +112,10 @@ /* LPDDR4 board total DDR is 3GB */ #define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */ -/* Serial */ -#define CONFIG_BAUDRATE 115200 - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY 8000000 /* 8MHz */ - #ifndef CONFIG_DM_PCA953X #define CONFIG_PCA953X #endif -/* Networking */ -#define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC - /* Misc configuration */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #endif /* __IMX8QXP_MEK_H */