X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8qxp_mek.h;h=7afc64800eb31393b429f957f37968345d79f39f;hb=f113d7d3034672de7d074506a05a7055f1f0dcae;hp=4e7532ec50a9a50a2b5d057824e729f71e5046fd;hpb=df6cf3d809fe543651e6bdf133baaa8b9841fe0f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 4e7532e..7afc648 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -11,15 +11,9 @@
 #include <asm/arch/imx-regs.h>
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_MAX_SIZE				(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK		0x013E000
 #define CONFIG_SPL_BSS_START_ADDR	0x00128000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x00120000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
 #define CONFIG_SERIAL_LPUART_BASE	0x5a060000
@@ -28,21 +22,8 @@
 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
 
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#define CONFIG_OF_EMBED
 #endif
 
-#define CONFIG_REMAKE_ELF
-
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_BOARD_SETUP
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
-#define USDHC1_BASE_ADDR                0x5B010000
-#define USDHC2_BASE_ADDR                0x5B020000
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifdef CONFIG_AHAB_BOOT
 #define AHAB_ENV "sec_boot=yes\0"
 #else
@@ -63,8 +44,8 @@
 	"initrd_addr=0x83800000\0"		\
 	"initrd_high=0xffffffffffffffff\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \
 	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -124,36 +105,11 @@
 			"fi;" \
 		"fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if test ${sec_boot} = yes; then " \
-				   "if run loadcntr; then " \
-					   "run mmcboot; " \
-				   "else run netboot; " \
-				   "fi; " \
-			    "else " \
-				   "if run loadimage; then " \
-					   "run mmcboot; " \
-				   "else run netboot; " \
-				   "fi; " \
-			 "fi; " \
-		   "fi; " \
-	   "else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_SP_ADDR         0x80200000
-
 /* Default environment is in SD */
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
-#define CONFIG_SYS_FSL_USDHC_NUM	2
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define PHYS_SDRAM_1			0x80000000
@@ -162,19 +118,10 @@
 /* LPDDR4 board total DDR is 3GB */
 #define PHYS_SDRAM_2_SIZE		0x40000000	/* 1 GB */
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		8000000	/* 8MHz */
-
 #ifndef CONFIG_DM_PCA953X
 #define CONFIG_PCA953X
 #endif
 
-/* Networking */
-#define CONFIG_FEC_XCV_TYPE		RGMII
-
 /* Misc configuration */
-#define CONFIG_SYS_CBSIZE	2048
-#define CONFIG_SYS_MAXARGS	64
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 #endif /* __IMX8QXP_MEK_H */