X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8qm_rom7720.h;h=308f17fd59597a70b59f6a6c5b3b45b6c13affaa;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=89b45546adc2ce091fc9f2581bbda34a57535796;hpb=6eecaf5d0f6b9a500dd5798f1f2bc8296bcfe158;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h
index 89b4554..308f17f 100644
--- a/include/configs/imx8qm_rom7720.h
+++ b/include/configs/imx8qm_rom7720.h
@@ -9,21 +9,13 @@
 #include <linux/sizes.h>
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
-#define CONFIG_REMAKE_ELF
 
-#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
-#define CONFIG_SPL_BSS_MAX_SIZE	0x1000  /* 4 KB */
-
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define USDHC1_BASE_ADDR		0x5B010000
 #define USDHC2_BASE_ADDR		0x5B020000
 #define USDHC3_BASE_ADDR		0x5B030000
 
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /* FUSE command */
 
 /* Boot M4 */
@@ -62,13 +54,13 @@
 	"image=Image\0" \
 	"panel=NULL\0" \
 	"console=ttyLP0\0" \
-	"fdt_addr=0x83000000\0"			\
+	"fdt_addr=0x84000000\0"			\
 	"boot_fdt=try\0" \
 	"fdt_file=imx8qm-rom7720-a1.dtb\0" \
 	"initrd_addr=0x83800000\0"		\
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \
 	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -108,38 +100,12 @@
 			"booti; " \
 		"fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_SP_ADDR		0x80200000
-
-/* Default environment is in SD */
-
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_ENV_SPI_BUS	CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS	CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE	CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
-#endif
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board,
  * USDHC3 is for SD on base board On DDR4 board, USDHC1 is mux for NAND,
  * USDHC2 is for SD, USDHC3 is for SD on base board
  */
-#define CONFIG_MMCROOT			"/dev/mmcblk2p2"  /* USDHC3 */
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
@@ -149,11 +115,5 @@
 /* LPDDR4 board total DDR is 6GB, DDR4 board total DDR is 4 GB */
 #define PHYS_SDRAM_2_SIZE		0x80000000	/* 2 GB */
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		8000000	/* 8MHz */
-
-/* Networking */
-#define CONFIG_FEC_XCV_TYPE		RGMII
-
 #include <linux/stringify.h>
 #endif /* __IMX8QM_ROM7720_H */