X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8qm_mek.h;h=9a5160d8d07f6cc1ec561fb35c39308249207ce4;hb=ca8a329a1b7f3195ee56fee4c0906ee883383dfa;hp=1864374a4fc80aef7d12ad0013c8781de5c4f8bd;hpb=50c9b0e1ddce280823484579c4ecc1f069e7833b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 1864374..9a5160d 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -10,14 +10,11 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
+#define CONFIG_SYS_BOOTM_LEN		(64 * SZ_1M)
+
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_MAX_SIZE				(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x800
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		0
 
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x013E000
 #define CONFIG_SPL_BSS_START_ADDR	0x00128000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
@@ -29,24 +26,8 @@
 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
 
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#define CONFIG_OF_EMBED
 #endif
 
-#define CONFIG_REMAKE_ELF
-
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_BOARD_SETUP
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
-#define USDHC1_BASE_ADDR                0x5B010000
-#define USDHC2_BASE_ADDR                0x5B020000
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifdef CONFIG_AHAB_BOOT
 #define AHAB_ENV "sec_boot=yes\0"
 #else
@@ -67,8 +48,8 @@
 	"initrd_addr=0x83800000\0"		\
 	"initrd_high=0xffffffffffffffff\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
 	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -128,44 +109,13 @@
 			"fi;" \
 		"fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if test ${sec_boot} = yes; then " \
-				   "if run loadcntr; then " \
-					   "run mmcboot; " \
-				   "else run netboot; " \
-				   "fi; " \
-			    "else " \
-				   "if run loadimage; then " \
-					   "run mmcboot; " \
-				   "else run netboot; " \
-				   "fi; " \
-			 "fi; " \
-		   "fi; " \
-	   "else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
-#define CONFIG_LOADADDR			0x80280000
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 
 /* Default environment is in SD */
-#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
-#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define PHYS_SDRAM_1			0x80000000
@@ -173,11 +123,4 @@
 #define PHYS_SDRAM_1_SIZE		0x80000000	/* 2 GB */
 #define PHYS_SDRAM_2_SIZE		0x100000000	/* 4 GB */
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		8000000	/* 8MHz */
-
-/* Networking */
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define FEC_QUIRK_ENET_MAC
-
 #endif /* __IMX8QM_MEK_H */