X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mq_phanbell.h;h=b66fc18fa5e84923b7c4e23cabe5d20bbb7b1c3c;hb=605bc145f91d2a28ba2e517cae4e53e255e34b6f;hp=e6575da4746e7f4af88b8ac28e8f798a654c59f0;hpb=61e1972e73df818013adeec750a402fcf298f137;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index e6575da..b66fc18 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -9,62 +9,27 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SPL_MAX_SIZE		(172 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_DRIVERS_MISC
-#define CONFIG_SPL_POWER
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_MMC
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
-#define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR		0x182000
+#define CFG_MALLOC_F_ADDR		0x182000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#undef CONFIG_DM_MMC
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 /* ENET Config */
 /* ENET1 */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_MII
-#define CONFIG_ETHPRIME                 "FEC"
-
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_FEC_MXC_PHYADDR          0
-#define FEC_QUIRK_ENET_MAC
-
-#define CONFIG_PHY_GIGE
-#define IMX_FEC_BASE			0x30BE0000
-
-#define CONFIG_PHYLIB
+#define CFG_FEC_MXC_PHYADDR          0
 #endif
 
-#define CONFIG_MFG_ENV_SETTINGS \
+#define CFG_MFG_ENV_SETTINGS \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffff\0" \
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	CONFIG_MFG_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS		\
+	CFG_MFG_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=Image\0" \
 	"console=ttymxc0,115200\0" \
@@ -75,8 +40,8 @@
 	"initrd_addr=0x43800000\0"		\
 	"initrd_high=0xffffffffffffffff\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
 	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -116,55 +81,19 @@
 			"booti; " \
 		"fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE        0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR        0x40000000
+#define CFG_SYS_INIT_RAM_SIZE        0x80000
 
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
-#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define CFG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0x40000000 /* 1GB DDR */
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
-					(PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_IMX_BOOTAUX
-
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-#define CONFIG_MXC_GPIO
+#define CFG_MXC_UART_BASE		UART_BASE_ADDR(1)
 
-#define CONFIG_OF_SYSTEM_SETUP
+#define CFG_SYS_FSL_USDHC_NUM	2
+#define CFG_SYS_FSL_ESDHC_ADDR       0
 
 #endif