X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mq_evk.h;h=d98f9263ca9afb01a6064982aaee13fcd2c0489f;hb=35bd70c5107f0cfa610b5c7074a7ee2a60d5d82f;hp=ecf4c2e46b7ba61b7c1428288a22d8c441fc0670;hpb=5bec37eb72bdb43d683593148f4911f1e1f34980;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index ecf4c2e..d98f926 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -7,13 +7,15 @@
 #define __IMX8M_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
+#define CONFIG_SYS_BOOTM_LEN		(32 * SZ_1M)
+
 #define CONFIG_SPL_MAX_SIZE		(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
@@ -57,21 +59,9 @@
 
 #define CONFIG_REMAKE_ELF
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-#undef CONFIG_CMD_IMLS
-
-#undef CONFIG_CMD_CRC32
-
 /* ENET Config */
 /* ENET1 */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_MII
 #define CONFIG_ETHPRIME                 "FEC"
 
@@ -173,8 +163,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
 /* Size of malloc() pool */
@@ -184,13 +172,6 @@
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0xC0000000 /* 3GB DDR */
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
-					(PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
@@ -205,8 +186,6 @@
 
 #define CONFIG_IMX_BOOTAUX
 
-#define CONFIG_CMD_MMC
-
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
@@ -214,8 +193,6 @@
 
 #define CONFIG_MXC_GPIO
 
-#define CONFIG_CMD_FUSE
-
 /* I2C Configs */
 #define CONFIG_SYS_I2C_SPEED		  100000