X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mq_evk.h;h=2d4c8d78c6769867ce033b37dde2f532762c4c60;hb=6cc04547cb3bbd3a3d78947f200acbae19e3c67f;hp=4aaed3ae7da7633bbe7263e55889d27c73610ca9;hpb=a8c281d4b737129c4f5cb52cb0821e6d055bbca3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 4aaed3a..2d4c8d7 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -10,26 +10,13 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		(64 * SZ_1M)
-
-#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR		0x182000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#undef CONFIG_DM_MMC
 
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
@@ -38,23 +25,15 @@
 /* ENET Config */
 /* ENET1 */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_ETHPRIME                 "FEC"
-
-#define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define FEC_QUIRK_ENET_MAC
-
-#define IMX_FEC_BASE			0x30BE0000
 #endif
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
        func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -69,33 +48,21 @@
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
 	"mmcpart=1\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0xC0000000 /* 3GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(1)
 
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+#define CFG_SYS_FSL_USDHC_NUM	2
+#define CFG_SYS_FSL_ESDHC_ADDR       0
 
 #endif