X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mq_cm.h;h=a242d5e3e8eec49e8c11af2499fa5bedb22ba3f6;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=b099004937df792cba60bd1f65fbf426338bd30d;hpb=87a9aa604de8a4a50642e25b88af328ab375893b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index b099004..a242d5e 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -12,15 +12,9 @@
 
 #define CONFIG_SYS_BOOTM_LEN		(32 * SZ_1M)
 
-#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
@@ -30,13 +24,8 @@
 
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 /* ENET Config */
 /* ENET1 */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_ETHPRIME                 "FEC"
-#endif
 
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
@@ -60,31 +49,19 @@
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
 	"mmcpart=1\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE					0x40000000 /* 1 GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(1)
 
 #define CONFIG_SYS_FSL_USDHC_NUM		2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0