X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mq_cm.h;h=828bd67237271159d3d9427d1a574b350e577737;hb=6786ce1ce14feb4d02854a0c04bc0cce505be46e;hp=7206c08a8c9b5da1092e3a34a8a7f09af552f38d;hpb=e0d7d06f393a4d56917844210a5da44fef20a944;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 7206c08..828bd67 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -10,47 +10,27 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		(32 * SZ_1M)
-
-#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR      0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR		0x182000
+#define CFG_MALLOC_F_ADDR		0x182000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 /* ENET Config */
 /* ENET1 */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_ETHPRIME                 "FEC"
-#endif
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 		func(MMC, mmc, 0) \
 		func(MMC, mmc, 1) \
 		func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+#define CFG_EXTRA_ENV_SETTINGS		\
 	BOOTENV \
 	"scriptaddr=0x43500000\0" \
 	"kernel_addr_r=0x40880000\0" \
@@ -61,36 +41,22 @@
 	"fdt_file=imx8mq-cm.dtb\0" \
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE        0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR        0x40000000
+#define CFG_SYS_INIT_RAM_SIZE        0x80000
 
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
-#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define CFG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE					0x40000000 /* 1 GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_FSL_USDHC_NUM		2
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+#define CFG_MXC_UART_BASE		UART_BASE_ADDR(1)
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+#define CFG_SYS_FSL_USDHC_NUM		2
+#define CFG_SYS_FSL_ESDHC_ADDR       0
 
 #endif