X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mp_venice.h;h=7d360583c416dc64d37418374ad846f7f0f5a8e0;hb=aa6e94deabb45154cea07ad44c4a5c047bca078b;hp=a510fa78539854372270b0036169c0df3361f967;hpb=9b5f9aeb3b48dbc059272168635a397ea5096a31;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h
index a510fa7..7d36058 100644
--- a/include/configs/imx8mp_venice.h
+++ b/include/configs/imx8mp_venice.h
@@ -9,96 +9,27 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_MONITOR_LEN		SZ_512K
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x960000
-#define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-#endif
-
-#define MEM_LAYOUT_ENV_SETTINGS \
-	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"fdt_addr_r=0x50200000\0" \
-	"scriptaddr=0x50280000\0" \
-	"ramdisk_addr_r=0x50300000\0" \
-	"kernel_comp_addr_r=0x40200000\0"
-
 /* Enable Distro Boot */
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#else
-#define BOOTENV
-#endif
-
-/* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	BOOTENV \
-	MEM_LAYOUT_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"bootm_size=0x10000000\0" \
-	"dev=2\0" \
-	"preboot=gsc wd-disable\0" \
-	"console=ttymxc1,115200\0" \
-	"update_firmware=" \
-		"tftpboot $loadaddr $image && " \
-		"setexpr blkcnt $filesize + 0x1ff && " \
-		"setexpr blkcnt $blkcnt / 0x200 && " \
-		"mmc dev $dev && " \
-		"mmc write $loadaddr 0x40 $blkcnt\0" \
-	"loadfdt=" \
-		"if $fsload $fdt_addr_r $dir/$fdt_file1; " \
-			"then echo loaded $fdt_file1; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
-			"then echo loaded $fdt_file2; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
-			"then echo loaded $fdt_file3; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
-			"then echo loaded $fdt_file4; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
-			"then echo loaded $fdt_file5; " \
-		"fi\0" \
-	"boot_net=" \
-		"setenv fsload tftpboot; " \
-		"run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
-		"booti $kernel_addr_r - $fdt_addr_r\0" \
-	"update_rootfs=" \
-		"tftpboot $loadaddr $image && " \
-		"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
-	"update_all=" \
-		"tftpboot $loadaddr $image && " \
-		"gzwrite mmc $dev $loadaddr $filesize\0" \
-	"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
+	"splblk=0x40\0" \
+	BOOTENV
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define CFG_SYS_SDRAM_BASE           0x40000000
 
 /* SDRAM configuration */
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			SZ_4G
-#define CONFIG_SYS_BOOTM_LEN		SZ_256M
-
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* FEC */
-#define FEC_QUIRK_ENET_MAC
 
 #endif