X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mp_evk.h;h=fe07a3cde6264435fcc2a56bdb4a4ff20efaacb3;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=92091dfd6ba1e3cf6c2a0f54906616d90e764747;hpb=795f8fd0b591eef7cf3f8c6fcf9788280029cc4a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 92091df..fe07a3c 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -14,104 +14,58 @@
 
 #define CONFIG_SPL_MAX_SIZE		(152 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
 #define CONFIG_SYS_UBOOT_BASE	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x960000
 #define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
 #define CONFIG_SPL_BSS_MAX_SIZE		0x400	/* 1 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #undef CONFIG_DM_MMC
-#undef CONFIG_DM_PMIC
-#undef CONFIG_DM_PMIC_PFUZE100
 
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PCA9450
 
-#undef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
+#endif
+
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_FEC_MXC_PHYADDR          1
+#define FEC_QUIRK_ENET_MAC
+
+#define DWC_NET_PHYADDR			1
+
+#define PHY_ANEG_TIMEOUT 20000
+
+#endif
 
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 1) \
+       func(MMC, mmc, 2)
+
+#include <config_distro_bootcmd.h>
 #endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
-	"script=boot.scr\0" \
+	BOOTENV \
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"image=Image\0" \
 	"console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \
-	"fdt_addr=0x43000000\0"			\
+	"fdt_addr_r=0x43000000\0"			\
 	"boot_fdt=try\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
-	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"else " \
-			"echo wait for boot; " \
-		"fi;\0" \
-	"netargs=setenv bootargs ${jh_clk} console=${console} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs;  " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${loadaddr} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"else " \
-			"booti; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else booti ${loadaddr} - ${fdt_addr}; fi"
 
 /* Link Definitions */
-#define CONFIG_LOADADDR			0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x80000
@@ -122,9 +76,6 @@
 
 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		SZ_32M
-
 /* Totally 6GB DDR */
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM			0x40000000
@@ -141,13 +92,7 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_FSL_USDHC
-
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-#define CONFIG_SYS_I2C_SPEED		100000
-
 #endif