X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mn_venice.h;h=adac387fac92f3f867f15bbd52e213c5ef90631b;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=c01a590c8af6df88c24991faa532b08a5e58dcc0;hpb=08f1d58affa4a3ec1fb68717be088dd3556fe26a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h
index c01a590..adac387 100644
--- a/include/configs/imx8mn_venice.h
+++ b/include/configs/imx8mn_venice.h
@@ -9,39 +9,28 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		SZ_512K
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x980000
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 #endif
 
 #define MEM_LAYOUT_ENV_SETTINGS \
-	"fdt_addr_r=0x44000000\0" \
-	"kernel_addr_r=0x42000000\0" \
-	"ramdisk_addr_r=0x46400000\0" \
-	"scriptaddr=0x46000000\0"
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"fdt_addr_r=0x50200000\0" \
+	"scriptaddr=0x50280000\0" \
+	"ramdisk_addr_r=0x50300000\0" \
+	"kernel_comp_addr_r=0x40200000\0"
 
 /* Enable Distro Boot */
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
+	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
-#else
-#define BOOTENV
-#endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -58,9 +47,22 @@
 		"setexpr blkcnt $blkcnt / 0x200 && " \
 		"mmc dev $dev && " \
 		"mmc write $loadaddr 0x40 $blkcnt\0" \
+	"loadfdt=" \
+		"if $fsload $fdt_addr_r $dir/$fdt_file1; " \
+			"then echo loaded $fdt_file1; " \
+		"elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
+			"then echo loaded $fdt_file2; " \
+		"elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
+			"then echo loaded $fdt_file3; " \
+		"elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
+			"then echo loaded $fdt_file4; " \
+		"elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
+			"then echo loaded $fdt_file5; " \
+		"fi\0" \
 	"boot_net=" \
-		"tftpboot $kernel_addr_r $image && " \
-		"booti $kernel_addr_r - $fdtcontroladdr\0" \
+		"setenv fsload tftpboot; " \
+		"run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
+		"booti $kernel_addr_r - $fdt_addr_r\0" \
 	"update_rootfs=" \
 		"tftpboot $loadaddr $image && " \
 		"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
@@ -71,31 +73,14 @@
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 
 /* SDRAM configuration */
 #define PHYS_SDRAM                      0x40000000
-#define PHYS_SDRAM_SIZE			SZ_1G
+#define PHYS_SDRAM_SIZE			SZ_4G
 #define CONFIG_SYS_BOOTM_LEN		SZ_256M
 
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		SZ_2K
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-/* USDHC */
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
 /* FEC */
 #define CONFIG_FEC_MXC_PHYADDR          0
 #define FEC_QUIRK_ENET_MAC