X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mn_venice.h;h=1cc054a82ba146bb13070dedddd01ba979a6e51d;hb=HEAD;hp=3cbe11a9035ab1c8bc9ecfb3173ca378fa71b2cf;hpb=1b04a961c6bcb9768f517198890cac680ee532e8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h
index 3cbe11a..1cc054a 100644
--- a/include/configs/imx8mn_venice.h
+++ b/include/configs/imx8mn_venice.h
@@ -3,108 +3,33 @@
  * Copyright 2022 Gateworks Corporation
  */
 
-#ifndef __IMX8MM_VENICE_H
-#define __IMX8MM_VENICE_H
+#ifndef __IMX8MN_VENICE_H
+#define __IMX8MN_VENICE_H
 
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_UBOOT_BASE	\
+#define CFG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x980000
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-#endif
-
-#define MEM_LAYOUT_ENV_SETTINGS \
-	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"fdt_addr_r=0x50200000\0" \
-	"scriptaddr=0x50280000\0" \
-	"ramdisk_addr_r=0x50300000\0" \
-	"kernel_comp_addr_r=0x40200000\0"
-
 /* Enable Distro Boot */
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#else
-#define BOOTENV
-#endif
-
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	BOOTENV \
-	MEM_LAYOUT_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"bootm_size=0x10000000\0" \
-	"dev=2\0" \
-	"preboot=gsc wd-disable\0" \
-	"console=ttymxc1,115200\0" \
-	"update_firmware=" \
-		"tftpboot $loadaddr $image && " \
-		"setexpr blkcnt $filesize + 0x1ff && " \
-		"setexpr blkcnt $blkcnt / 0x200 && " \
-		"mmc dev $dev && " \
-		"mmc write $loadaddr 0x40 $blkcnt\0" \
-	"loadfdt=" \
-		"if $fsload $fdt_addr_r $dir/$fdt_file1; " \
-			"then echo loaded $fdt_file1; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file2; " \
-			"then echo loaded $fdt_file2; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file3; " \
-			"then echo loaded $fdt_file3; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file4; " \
-			"then echo loaded $fdt_file4; " \
-		"elif $fsload $fdt_addr_r $dir/$fdt_file5; " \
-			"then echo loaded $fdt_file5; " \
-		"fi\0" \
-	"boot_net=" \
-		"setenv fsload tftpboot; " \
-		"run loadfdt && tftpboot $kernel_addr_r $dir/Image && " \
-		"booti $kernel_addr_r - $fdt_addr_r\0" \
-	"update_rootfs=" \
-		"tftpboot $loadaddr $image && " \
-		"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
-	"update_all=" \
-		"tftpboot $loadaddr $image && " \
-		"gzwrite mmc $dev $loadaddr $filesize\0" \
-	"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
-
-#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_SDRAM_BASE           0x40000000
-
-/* SDRAM configuration */
-#define PHYS_SDRAM                      0x40000000
-#define PHYS_SDRAM_SIZE			SZ_4G
-#define CONFIG_SYS_BOOTM_LEN		SZ_256M
-
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(2)
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		SZ_2K
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CFG_EXTRA_ENV_SETTINGS \
+	BOOTENV
+
+#define CFG_SYS_INIT_RAM_ADDR        0x40000000
+#define CFG_SYS_INIT_RAM_SIZE        SZ_2M
+
+/* SDRAM configuration: 4GiB */
+#define CFG_SYS_SDRAM_BASE           0x40000000
+#define PHYS_SDRAM                   0x40000000
+#define PHYS_SDRAM_SIZE              0x80000000      /* 2 GB */
+#define PHYS_SDRAM_2                 0xC0000000
+#define PHYS_SDRAM_2_SIZE            0x80000000      /* 2 GB */
 
 #endif