X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mn_evk.h;h=fac2c26146d6636ce7d5caff3316ac89d14a1830;hb=f113d7d3034672de7d074506a05a7055f1f0dcae;hp=4350b5a62afff42b300576b57a6f582fff85b58b;hpb=621e09cb3bf7e6d4fce9dd5e6de97e057adebc3a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 4350b5a..fac2c26 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -10,137 +10,64 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
+#define CONFIG_SYS_BOOTM_LEN		(32 * SZ_1M)
+
 #define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x95fff0
-#define CONFIG_SPL_BSS_START_ADDR	0x00950000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
+#define CONFIG_SPL_BSS_START_ADDR	0x950000
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR		0x00940000
 
 /* For RAW image gives a error info not panic */
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
+/* see include/configs/ti_armv7_common.h */
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"kernel_addr_r=0x42000000\0" \
+	"fdt_addr_r=0x48000000\0" \
+	"fdtoverlay_addr_r=0x49000000\0" \
+	"ramdisk_addr_r=0x48080000\0" \
+	"initrd_addr=0x48080000\0" \
+	"scriptaddr=0x40000000\0" \
+	"pxefile_addr_r=0x40100000\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS		\
-	"script=boot.scr\0" \
-	"image=Image.itb\0" \
+	"image=Image\0" \
+	BOOTENV \
 	"console=ttymxc1,115200\0" \
-	"fdt_addr=0x43000000\0"			\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"boot_fit=try\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"initrd_addr=0x43800000\0"		\
-	"initrd_high=0xffffffffffffffff\0" \
-	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
-	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
-			"bootm ${loadaddr}; " \
-		"else " \
-			"if run loadfdt; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs;  " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${loadaddr} ${image}; " \
-		"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
-			"bootm ${loadaddr}; " \
-		"else " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "fi;"
+	"boot_fit=no\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"bootm_size=0x10000000\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+	ENV_MEM_LAYOUT_SETTINGS
 
 /* Link Definitions */
-#define CONFIG_LOADADDR			0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC2 */
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		SZ_32M
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000 /* 2GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* USDHC */
-#define CONFIG_FSL_USDHC
-
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(2)
 
 #endif