X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mn_evk.h;h=b759b834b808ff4c6dc8b619175ece10c6101289;hb=e35da4994aa51112a1becfb127de6346f20475ab;hp=2be4750f5f907bf958248cb8c572502f261d0ab0;hpb=49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 2be4750..b759b83 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -10,84 +10,47 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		(32 * SZ_1M)
-
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_UBOOT_BASE	\
+#define CFG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x980000
-#define CONFIG_SPL_BSS_START_ADDR	0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#endif
-
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+/* see include/configs/ti_armv7_common.h */
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"kernel_addr_r=0x42000000\0" \
+	"fdt_addr_r=0x48000000\0" \
+	"fdtoverlay_addr_r=0x49000000\0" \
+	"ramdisk_addr_r=0x48080000\0" \
+	"initrd_addr=0x48080000\0" \
+	"scriptaddr=0x40000000\0" \
+	"pxefile_addr_r=0x40100000\0"
+
+#define CFG_EXTRA_ENV_SETTINGS		\
 	"image=Image\0" \
 	BOOTENV \
-	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"console=ttymxc1,115200\0" \
-	"fdt_addr_r=0x43000000\0"			\
 	"boot_fit=no\0" \
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+	ENV_MEM_LAYOUT_SETTINGS
 
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE        0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR        0x40000000
+#define CFG_SYS_INIT_RAM_SIZE        0x200000
 
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		SZ_32M
-
-#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define CFG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000 /* 2GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* USDHC */
-#define CONFIG_FSL_USDHC
-
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
 #endif