X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mm_icore_mx8mm.h;h=63bd865398da50cc31a0e41c48347991af3679a4;hb=2f57139c211d193debddd25f45c02b738cefd871;hp=af5be6889dff237611a7420aba36bd0fd7563b97;hpb=ea184cbff99ea1d82dcf94c95afe054e95da5069;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h
index af5be68..63bd865 100644
--- a/include/configs/imx8mm_icore_mx8mm.h
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_SPL_MAX_SIZE		(148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
 #define CONFIG_SYS_UBOOT_BASE \
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
@@ -30,15 +28,11 @@
 # define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 #endif /* CONFIG_SPL_BUILD */
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END	(CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
-
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 2) \
 	func(MMC, mmc, 0)
 #include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
 #else
 #define BOOTENV
 #endif
@@ -56,8 +50,6 @@
 	BOOTENV
 
 /* Link Definitions */
-#define CONFIG_LOADADDR			0x40480000
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
@@ -66,8 +58,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		SZ_32M
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 
 /* SDRAM configuration */
@@ -75,26 +65,11 @@
 #define PHYS_SDRAM_SIZE			SZ_2G /* 2GB DDR */
 #define CONFIG_SYS_BOOTM_LEN		SZ_256M
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END	\
-	(CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
-
 /* UART */
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(2)
 
 /* USDHC */
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-/* I2C */
-#define CONFIG_SYS_I2C_SPEED		100000
 
 #endif /* __IMX8MM_ICORE_MX8MM_H */