X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mm_evk.h;h=dac642ed0700dde905f770008c2621d2aff3cab2;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=167ca19f2108c0228ce9ef7eface8ba2719ac624;hpb=2ffa0e87df3a7595f71d05782924ee83146d9fe7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index 167ca19..dac642e 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -10,36 +10,32 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		(64 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
+#define UBOOT_ITB_OFFSET			0x57C00
+#define FSPI_CONF_BLOCK_SIZE		0x1000
+#define UBOOT_ITB_OFFSET_FSPI  \
+	(UBOOT_ITB_OFFSET + FSPI_CONF_BLOCK_SIZE)
+#ifdef CONFIG_FSPI_CONF_HEADER
+#define CONFIG_SYS_UBOOT_BASE  \
+	(QSPI0_AMBA_BASE + UBOOT_ITB_OFFSET_FSPI)
+#else
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+#endif
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x920000
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR		0x930000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 2) \
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -53,46 +49,19 @@
 	"fdtfile=imx8mm-evk.dtb\0" \
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000 /* 2GB DDR */
 
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* USDHC */
-
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-#define CONFIG_ETHPRIME                 "FEC"
-
-#define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define FEC_QUIRK_ENET_MAC
-
-#define IMX_FEC_BASE			0x30BE0000
 
 #endif