X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mm_evk.h;h=83521ad401d82da7e13e2f970473801ed672b51b;hb=acbc1d86f16cc8372cccb7b862a0b9dc242f8fe5;hp=7da2b9005299bc0a31c3da923e07e02701df1526;hpb=32efcbc09f2f34e92c88bc54996e550ba3aa6ba9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index 7da2b90..83521ad 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -7,17 +7,14 @@
 #define __IMX8MM_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE			SZ_8K
-#endif
-
+#define CONFIG_SYS_BOOTM_LEN		(32 * SZ_1M)
 #define CONFIG_SPL_MAX_SIZE		(148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		SZ_512K
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
@@ -41,11 +38,10 @@
 	"image=Image\0" \
 	"console=ttymxc1,115200\0" \
 	"fdt_addr=0x43000000\0"			\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"boot_fit=no\0" \
 	"fdt_file=imx8mm-evk.dtb\0" \
 	"initrd_addr=0x43800000\0"		\
-	"initrd_high=0xffffffffffffffff\0" \
+	"bootm_size=0x10000000\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
@@ -112,8 +108,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
 /* Size of malloc() pool */
@@ -123,9 +117,6 @@
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000 /* 2GB DDR */
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
-
 #define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
 
 /* Monitor Command Prompt */