X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mm_data_modul_edm_sbc.h;h=dd9f93f35c29370f15a5157804faea3c669f6254;hb=6cc04547cb3bbd3a3d78947f200acbae19e3c67f;hp=2999e836229c59b11651e7557d96b613df207a42;hpb=ca8a329a1b7f3195ee56fee4c0906ee883383dfa;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h
index 2999e83..dd9f93f 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -10,31 +10,16 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		SZ_128M
-
-#define CONFIG_SYS_MONITOR_LEN		SZ_1M
-
-#define CONFIG_SPL_STACK		0x920000
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 kiB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_16M	/* 16 MiB */
-
 #define CONFIG_MALLOC_F_ADDR		0x930000
 
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
 /* Link Definitions */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM			0x40000000
@@ -46,10 +31,8 @@
 #define PHY_ANEG_TIMEOUT		20000
 
 /* USDHC */
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
-#if !defined(CONFIG_SPL_BUILD)
+#define CFG_SYS_FSL_USDHC_NUM	2
+#define CFG_SYS_FSL_ESDHC_ADDR	0
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"altbootcmd=setenv devpart 2 && run bootcmd ; reset\0"		\
@@ -65,7 +48,6 @@
 		"mtd nor0=sf raw 0x0 0x1000000\0"			\
 	"dmo_preboot="							\
 		"sf probe ; " /* Scan for SPI NOR, needed by DFU */	\
-		"run dmo_usb_start_hub ; "				\
 		/* Attempt to start USB and Network console */		\
 		"run dmo_usb_cdc_acm_start ; "				\
 		"run dmo_netconsole_start\0"				\
@@ -85,25 +67,6 @@
 				"setenv stdin ${stdin},usbacm ; "	\
 			"fi ; "						\
 		"fi\0"							\
-	"dmo_usb_start_hub="						\
-		"i2c dev 1 ; "						\
-		/* Reset the USB USB */					\
-		"gpio clear GPIO5_2 ; sleep 0.01 ; " /* t1 > 1us */	\
-		"gpio set GPIO5_2 ; sleep 0.01 ; " /* t5 > 3us */	\
-		/* Write chunks of descriptor into the USB HUB */	\
-		"mw.l 0x7e1000 0x14042417 ; mw.l 0x7e1004 0x9b0bb325 ; "\
-		"mw.l 0x7e1008 0x00000220 ; mw.l 0x7e100c 0x01320100 ; "\
-		"mw.l 0x7e1010 0x00003232 ; mw.l 0x7e1014 0x4d000909 ; "\
-		"i2c write 0x7e1000 0x2c 0x00 0x18 -s ; "		\
-		"mw.l 0x7e1000 0x6300690f ; mw.l 0x7e1004 0x6f007200 ; "\
-		"mw.l 0x7e1008 0x68006300 ; mw.l 0x7e100c 0x70006900 ; "\
-		"i2c write 0x7e1000 0x2c 0x18 0x10 -s ; "		\
-		"mw.l 0x7e1000 0x53005511 ; mw.l 0x7e1004 0x32004200 ; "\
-		"mw.l 0x7e1008 0x31003500 ; mw.l 0x7e100c 0x42003400 ; "\
-		"mw.l 0x7e1010 0x00006900 ; "				\
-		"i2c write 0x7e1000 0x2c 0x54 0x12 -s ; "		\
-		"mw.l 0x7e1000 0x00000101 ; "				\
-		"i2c write 0x7e1000 0x2c 0xff 0x2 -s\0"			\
 	"dmo_netconsole_start="						\
 		"if test \"${dmo_netconsole_enabled}\" = \"true\" ; then "\
 			"setenv autoload false && "			\
@@ -116,5 +79,3 @@
 		"fi"
 
 #endif
-
-#endif