X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx8mm_beacon.h;h=d85ae21e23179226bc104d29c44c6d6e1c8c2777;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=2bdcc0ab725bba84b3945228a2c4785ff8b95023;hpb=8bef03683623d6a7adfff1f859ed44fad9e92ed7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
index 2bdcc0a..d85ae21 100644
--- a/include/configs/imx8mm_beacon.h
+++ b/include/configs/imx8mm_beacon.h
@@ -9,29 +9,18 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN	SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_UBOOT_BASE	\
+#define CFG_SYS_UBOOT_BASE	\
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK		0x920000
-#define CONFIG_SPL_BSS_START_ADDR	0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE	SZ_8K	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
-
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR		0x930000
+#define CFG_MALLOC_F_ADDR		0x930000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+#define CFG_EXTRA_ENV_SETTINGS		\
 	"script=boot.scr\0" \
 	"image=Image\0" \
 	"console=ttymxc1,115200\0" \
@@ -40,7 +29,7 @@
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"initrd_addr=0x43800000\0"		\
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcpart=1\0" \
 	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate}" \
@@ -80,53 +69,13 @@
 			"fi; " \
 		"fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "fi;"
-
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE        0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR        0x40000000
+#define CFG_SYS_INIT_RAM_SIZE        0x200000
 
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CFG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE		0x80000000 /* 2GB DDR */
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END	(CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		2048
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* USDHC */
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-/* FEC*/
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_FEC_MXC_PHYADDR          0
-#define FEC_QUIRK_ENET_MAC
-#define IMX_FEC_BASE			0x30BE0000
-
 #endif