X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx6_spl.h;h=488b2f1696a9af79a62688d6116e356fc92ea2f2;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=720ff045a7ca64bb1dd2d4dd15f22d68a66285d0;hpb=e8f80a5a58c9b506453cc0780687e8ed457d30a6;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 720ff04..488b2f1 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -7,62 +7,17 @@ #define __IMX6_SPL_CONFIG_H #ifdef CONFIG_SPL -/* - * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals: - * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF - * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well - * - BOOT ROM stack is at 0x0091FFB8 - * - if icache/dcache is enabled (eFuse/strapping controlled) then the - * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to - * fit between 0x00907000 and 0x00918000. - * - Additionally the BOOT ROM loads what they consider the firmware image - * which consists of a 4K header in front of us that contains the IVT, DCD - * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 - * or 64KB - */ -#define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_STACK 0x0091FFB8 -/* - * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the - * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a - * boot media (given that boot media specific offset is configured properly). - */ -#define CONFIG_SPL_PAD_TO 0x11000 /* MMC support */ -#if defined(CONFIG_SPL_MMC_SUPPORT) -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#if defined(CONFIG_SPL_MMC) #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ #endif /* SATA support */ -#if defined(CONFIG_SPL_SATA_SUPPORT) -#define CONFIG_SPL_SATA_BOOT_DEVICE 0 +#if defined(CONFIG_SPL_SATA) #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 #endif -/* Define the payload for FAT/EXT support */ -#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) -# ifdef CONFIG_OF_CONTROL -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -# else -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -# endif -#endif - -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) -#define CONFIG_SPL_BSS_START_ADDR 0x88200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x88300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#else -#define CONFIG_SPL_BSS_START_ADDR 0x18200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x18300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#endif #endif #endif