X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx31_phycore.h;h=3153eb5b396fd94e46153287d6331425373b57c0;hb=1086c5d6f8541460f0f10e4a302d8aac27e0e6e0;hp=1dbafa0521ce59c21148fe173169c9dc13a254f3;hpb=4fb799aeafa71c4e6caacd3acdc4a4547cfbd5d4;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 1dbafa0..3153eb5 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -28,44 +28,38 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +#include + +/* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -/* Temporarily disabled */ -#if 0 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 -#endif - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024) /* * Hardware drivers */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MXC 1 -#define CONFIG_SYS_I2C_MX31_PORT2 1 +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_MX31_PORT2 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -85,42 +79,60 @@ #define CONFIG_BOOTDELAY 3 -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \ + "1536k(kernel),-(root)" #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.23.168 #define CONFIG_SERVERIP 192.168.23.2 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2 rootfstype=jffs2" \ - "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 $(uimage); bootm\0" \ - "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; bootm 0x80000000\0" \ - "unlock=yes\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \ - "prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \ - "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0" - - -#define CONFIG_NET_MULTI -#define CONFIG_SMC911X 1 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootargs_flash=setenv bootargs $(bootargs) " \ + "root=/dev/mtdblock2 rootfstype=jffs2\0" \ + "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \ + "tftpboot 0x80000000 $(uimage);bootm\0" \ + "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \ + "bootm 0x80000000\0" \ + "unlock=yes\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "prg_uboot=tftpboot 0x80000000 $(uboot);" \ + "protect off 0xa0000000 +0x20000;" \ + "erase 0xa0000000 +0x20000;" \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" \ + "prg_kernel=tftpboot 0x80000000 $(uimage);" \ + "erase 0xa0040000 +0x180000;" \ + "cp.b 0x80000000 0xa0040000 $(filesize)\0" \ + "prg_jffs2=tftpboot 0x80000000 $(jffs2);" \ + "erase 0xa01c0000 0xa1ffffff;" \ + "cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ + "videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \ + "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \ + "sync:1241513985,vmode:0\0" + + +#define CONFIG_SMC911X #define CONFIG_SMC911X_BASE 0xa8000000 -#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_32_BIT /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 @@ -129,49 +141,63 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- +/* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -/*----------------------------------------------------------------------- +/* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) -/*----------------------------------------------------------------------- +/* * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE 0xa0000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ -#define CONFIG_ENV_SIZE 4096 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */ +#define CONFIG_ENV_SIZE 4096 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */ -/*----------------------------------------------------------------------- +/* * CFI FLASH driver setup */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ +/* + * Timeout for Flash Erase and Flash Write + * timeout values are in ticks + */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* * JFFS2 partitions @@ -181,25 +207,26 @@ /* EET platform additions */ #ifdef CONFIG_IMX31_PHYCORE_EET -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT -#define CONFIG_MX31_GPIO 1 +#define CONFIG_MXC_GPIO -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 +#define CONFIG_HARD_SPI +#define CONFIG_MXC_SPI #define CONFIG_CMD_SPI -#define CONFIG_S6E63D6 1 - -#define CONFIG_LCD 1 -#define CONFIG_VIDEO_MX3 1 -#define CONFIG_SYS_WHITE_ON_BLACK 1 -#define LCD_BPP LCD_COLOR8 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -#define CONFIG_SPLASH_SCREEN 1 -#define CONFIG_CMD_BMP 1 +#define CONFIG_S6E63D6 + +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_MX3 +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP #endif #endif /* __CONFIG_H */