X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx27lite-common.h;h=cd89fadb39bff893ee33bdb81429768bfbcb41fe;hb=d7869b2183d2b786e5410b97a5a6b2e630e7825e;hp=0936344c601e5d8d4b7e3ae87da6abf7bca41ba9;hpb=1d2c0506d31a9997e5ffc22e90942902f673b107;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 0936344..cd89fad 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
  *
  * based on:
  * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __IMX27LITE_COMMON_CONFIG_H
@@ -16,8 +15,6 @@
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
 
-#define CONFIG_SYS_TEXT_BASE		0xc0000000
-
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
@@ -75,7 +72,6 @@
 /* memtest start address */
 #define CONFIG_SYS_MEMTEST_START	0xA0000000
 #define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
 
@@ -84,13 +80,10 @@
  */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
 /*
  * Flash & Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 /* Use buffered writes (~10x faster) */
@@ -116,18 +109,15 @@
  */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR		0x1f
-#define CONFIG_MII
 
 /*
  * MTD
  */
 #define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
 
 /*
  * NAND
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0xd8000000
@@ -135,41 +125,11 @@
 #define CONFIG_MXC_NAND_HWECC
 
 /*
- * SD/MMC
- */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
-/*
- * GPIO
- */
-#define CONFIG_MXC_GPIO
-
-/*
- * MTD partitions
- */
-#define CONFIG_CMD_MTDPARTS
-
-/*
  * U-Boot general configuration
  */
 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-		sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
-
 
 #define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
@@ -186,9 +146,9 @@
 		" console=ttymxc0,${baudrate}\0"			\
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"kernel_addr_r=a0800000\0"					\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
+	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
 	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
 		"run nfsargs addip addtty addmtd addmisc;"		\
@@ -200,8 +160,8 @@
 		" +${filesize};cp.b ${fileaddr} "			\
 		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"	\
 	"upd=run load update\0"						\
-	"mtdids=" MTDIDS_DEFAULT "\0"					\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"					\
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"				\
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1