X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx27lite-common.h;h=641e4037d50b74ff1ee3799c722794745d9b58a1;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=8c5c06162088c40c4ca901ff273c1b1220096848;hpb=1c4b5038afcc7cdb1064713f65571da05aa0de0e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 8c5c061..641e403 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -15,10 +15,6 @@
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
 /*
  * Lowlevel configuration
  */
@@ -67,8 +63,6 @@
 /*
  * Memory Info
  */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
 /* memtest start address */
 #define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
@@ -83,7 +77,6 @@
  */
 /* Use buffered writes (~10x faster) */
 /* Use hardware sector protection */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
 /* CS2 Base address */
 #define PHYS_FLASH_1			0xc0000000
 /* Flash Base for U-Boot */
@@ -97,7 +90,6 @@
 /*
  * Ethernet
  */
-#define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR		0x1f
 
 /*
@@ -110,7 +102,6 @@
 #define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0xd8000000
-#define CONFIG_JFFS2_NAND
 #define CONFIG_MXC_NAND_HWECC
 
 /*
@@ -120,9 +111,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
-#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\