X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fimx27lite-common.h;h=27aab38926d7137df1ed73f99f557f3afac4270b;hb=9d9f59dd0a97b327b784699152f7055adc7b3520;hp=962856e101ed28023414be7c2fe55df8b8151b0c;hpb=0a9ef45158d586017839d4b6fccd7f8f16672156;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 962856e..27aab38 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
  *
  * based on:
  * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __IMX27LITE_COMMON_CONFIG_H
@@ -16,12 +15,6 @@
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
 
-#define CONFIG_SYS_TEXT_BASE		0xc0000000
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
 /*
  * Lowlevel configuration
  */
@@ -70,31 +63,20 @@
 /*
  * Memory Info
  */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
 /* memtest start address */
-#define CONFIG_SYS_MEMTEST_START	0xA0000000
-#define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
 
 /*
  * Serial Driver info
  */
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 
 /*
  * Flash & Environment
  */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 /* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION		1
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
 /* CS2 Base address */
 #define PHYS_FLASH_1			0xc0000000
@@ -104,23 +86,17 @@
 		CONFIG_SYS_FLASH_SECT_SZ)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
 /* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*
  * Ethernet
  */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR		0x1f
-#define CONFIG_MII
 
 /*
  * MTD
  */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
 
 /*
  * NAND
@@ -132,21 +108,11 @@
 #define CONFIG_MXC_NAND_HWECC
 
 /*
- * GPIO
- */
-#define CONFIG_MXC_GPIO
-
-/*
  * U-Boot general configuration
  */
 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
@@ -160,9 +126,9 @@
 		" console=ttymxc0,${baudrate}\0"			\
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"kernel_addr_r=a0800000\0"					\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
+	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
 	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
 		"run nfsargs addip addtty addmtd addmisc;"		\
@@ -174,8 +140,8 @@
 		" +${filesize};cp.b ${fileaddr} "			\
 		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"	\
 	"upd=run load update\0"						\
-	"mtdids=" MTDIDS_DEFAULT "\0"					\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"					\
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"				\
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1