X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fids8313.h;h=d5c9489bce6e4e55506417c28208f5ec68eb2b89;hb=2f57139c211d193debddd25f45c02b738cefd871;hp=bcd8aee7c323ce62a3e8fea274f39ec4a55c8cc7;hpb=60c7facfc965af6ff8ea14ee26c9d49cd2d0ec22;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index bcd8aee..d5c9489 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -16,9 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_BOOT_RETRY_TIME		900
-#define CONFIG_BOOT_RETRY_MIN		30
-#define CONFIG_RESET_TO_RETRY
 
 #define CONFIG_SYS_SICRH	0x00000000
 #define CONFIG_SYS_SICRL	(SICRL_LBC | SICRL_SPI_D)
@@ -111,14 +108,12 @@
 /*
  * NOR FLASH setup
  */
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_SHOW_PROGRESS	50
 
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
 #define CONFIG_SYS_FLASH_SIZE		8
 
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	128
 
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000
@@ -129,10 +124,6 @@
  */
 #define CONFIG_SYS_NAND_BASE		0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_MAX_CHIPS	1
-#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_NAND_PAGE_SIZE	(2048)
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
 #define NAND_CACHE_PAGES		64
 
 
@@ -157,25 +148,17 @@
 /*
  * HW-Watchdog
  */
-#define CONFIG_WATCHDOG		1
 #define CONFIG_SYS_WATCHDOG_VALUE	0xFFFF
 
 /*
  * I2C setup
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
-#define CONFIG_RTC_PCF8563
 #define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
  * Ethernet setup
  */
 #ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME		"TSEC0"
 #define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define TSEC1_PHY_ADDR			0x1
@@ -184,14 +167,12 @@
 #endif
 
 #ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME		"TSEC1"
 #define CONFIG_SYS_TSEC2_OFFSET	0x25000
 #define TSEC2_PHY_ADDR			0x3
 #define TSEC2_FLAGS			TSEC_GIGABIT
 #define TSEC2_PHYIDX			0
 #endif
-#define CONFIG_ETHPRIME		"TSEC1"
 
 /*
  * Serial Port
@@ -211,14 +192,11 @@
 /*
  * U-Boot environment setup
  */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(8 * 1024 * 1024)
 
 /*
  * Environment Configuration
@@ -227,10 +205,8 @@
 #define CONFIG_NETDEV			eth1
 #define CONFIG_HOSTNAME		"ids8313"
 #define CONFIG_ROOTPATH		"/opt/eldk-4.2/ppc_6xx"
-#define CONFIG_BOOTFILE		"ids8313/uImage"
 #define CONFIG_UBOOTPATH		"ids8313/u-boot.bin"
 #define CONFIG_FDTFILE			"ids8313/ids8313.dtb"
-#define CONFIG_LOADADDR		0x400000
 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
 
 /* Initial Memory map for Linux*/
@@ -239,18 +215,10 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_LOAD_ADDR		0x100000
 #define CONFIG_LOADS_ECHO
-#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTCOMMAND		"run boot_cramfs"
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_DEV		"0"
-
 /* mtdparts command line support */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -285,14 +253,6 @@
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"				\
 	"\0"
 
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv rootdev /dev/nfs;"					\
-	"run setipargs;run addmtd;"					\
-	"tftp ${loadaddr} ${bootfile};"				\
-	"tftp ${fdtaddr} ${fdtfile};"					\
-	"fdt addr ${fdtaddr};"						\
-	"bootm ${loadaddr} - ${fdtaddr}"
-
 /* UBI Support */
 
 #endif	/* __CONFIG_H */