X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fids8313.h;h=7e4c497fe0ae65b22dd5a3f02d61c1593cccdf63;hb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;hp=835789528d5146129240d8bfb935f6b74420f6ed;hpb=b25f8e2112b1582ce6386e846800a31bab688e50;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 8357895..7e4c497 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -5,8 +6,6 @@
  * Based on:
  * Copyright (c) 2011 IDS GmbH, Germany
  * Sergej Stepanov <ste@ids.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -20,8 +19,6 @@
 
 #define CONFIG_FSL_ELBC
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_BOOT_RETRY_TIME		900
 #define CONFIG_BOOT_RETRY_MIN		30
 #define CONFIG_RESET_TO_RETRY
@@ -162,20 +159,15 @@
  */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC2
-#define CONFIG_HARD_SPI
 
 /*
  * NOR FLASH setup
  */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_SHOW_PROGRESS	50
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
 #define CONFIG_SYS_FLASH_SIZE		8
-#define CONFIG_SYS_FLASH_PROTECTION
 
 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016
@@ -281,15 +273,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
- * SPI setup
- */
-#ifdef CONFIG_HARD_SPI
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR		0x00000001
-#define CONFIG_SYS_GPIO1_DAT		0x00000001
-#endif
-
-/*
  * Ethernet setup
  */
 #ifdef CONFIG_TSEC1
@@ -447,7 +430,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x00C00000
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000
-#define CONFIG_MII
 #define CONFIG_LOADS_ECHO
 #define CONFIG_TIMESTAMP
 #define CONFIG_PREBOOT			"echo;" \
@@ -460,8 +442,6 @@
 #define CONFIG_JFFS2_DEV		"0"
 
 /* mtdparts command line support */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
@@ -504,6 +484,5 @@
 	"bootm ${loadaddr} - ${fdtaddr}"
 
 /* UBI Support */
-#define CONFIG_MTD_PARTITIONS
 
 #endif	/* __CONFIG_H */