X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fids8313.h;h=7e4c497fe0ae65b22dd5a3f02d61c1593cccdf63;hb=504bf790da08db9b4a443566cf6ef577f9c7996a;hp=b43c8c711e488a5d664ca26fec0e2458a4895023;hpb=43ede0bca7fc1590b623832b743213b818257a27;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index b43c8c7..7e4c497 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -5,8 +6,6 @@
  * Based on:
  * Copyright (c) 2011 IDS GmbH, Germany
  * Sergej Stepanov <ste@ids.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -17,12 +16,9 @@
  */
 #define CONFIG_MPC831x
 #define CONFIG_MPC8313
-#define CONFIG_IDS8313
 
 #define CONFIG_FSL_ELBC
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_BOOT_RETRY_TIME		900
 #define CONFIG_BOOT_RETRY_MIN		30
 #define CONFIG_RESET_TO_RETRY
@@ -163,21 +159,15 @@
  */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC2
-#define CONFIG_TSEC_ENET
-#define CONFIG_HARD_SPI
 
 /*
  * NOR FLASH setup
  */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_SHOW_PROGRESS	50
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
 #define CONFIG_SYS_FLASH_SIZE		8
-#define CONFIG_SYS_FLASH_PROTECTION
 
 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016
@@ -283,16 +273,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
- * SPI setup
- */
-#ifdef CONFIG_HARD_SPI
-#define CONFIG_MPC8XXX_SPI
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR		0x00000001
-#define CONFIG_SYS_GPIO1_DAT		0x00000001
-#endif
-
-/*
  * Ethernet setup
  */
 #ifdef CONFIG_TSEC1
@@ -317,7 +297,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 
@@ -411,11 +390,6 @@
 /*
  * U-Boot environment setup
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
@@ -435,7 +409,7 @@
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #define CONFIG_NETDEV			eth1
-#define CONFIG_HOSTNAME		ids8313
+#define CONFIG_HOSTNAME		"ids8313"
 #define CONFIG_ROOTPATH		"/opt/eldk-4.2/ppc_6xx"
 #define CONFIG_BOOTFILE		"ids8313/uImage"
 #define CONFIG_UBOOTPATH		"ids8313/u-boot.bin"
@@ -449,7 +423,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE		1024
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
@@ -457,7 +430,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x00C00000
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000
-#define CONFIG_MII
 #define CONFIG_LOADS_ECHO
 #define CONFIG_TIMESTAMP
 #define CONFIG_PREBOOT			"echo;" \
@@ -470,8 +442,6 @@
 #define CONFIG_JFFS2_DEV		"0"
 
 /* mtdparts command line support */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
@@ -514,14 +484,5 @@
 	"bootm ${loadaddr} - ${fdtaddr}"
 
 /* UBI Support */
-#define CONFIG_MTD_PARTITIONS
-
-/* bootcount support */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_I2C
-#define CONFIG_BOOTCOUNT_ALEN	1
-#define CONFIG_SYS_BOOTCOUNT_ADDR	0x9
-
-#define CONFIG_IMAGE_FORMAT_LEGACY
 
 #endif	/* __CONFIG_H */