X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fibf-dsp561.h;h=cd856ac79c3870c3c6b8d239f9372c127e012078;hb=0ce8437f3006f86d093f83120c64f657bbac3c31;hp=6d03c4ca765930e12f2c64f64f1478a73356161c;hpb=0f52b560f19623ec651f9b9b40405d138ec251d3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index 6d03c4c..cd856ac 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -5,13 +5,12 @@
 #ifndef __CONFIG_IBF_DSP561__H__
 #define __CONFIG_IBF_DSP561__H__
 
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
 
 
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU             bf561-0.5
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
@@ -58,6 +57,18 @@
 
 
 /*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AX88180	1
+#define AX88180_BASE		0x2c000000
+#define CONFIG_HOSTNAME		ibf-dsp561
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
+
+
+/*
  * Flash Settings
  */
 #define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
@@ -75,7 +86,24 @@
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+	arch/blackfin/cpu/traps.o		(.text .text.*); \
+	arch/blackfin/cpu/interrupt.o	(.text .text.*); \
+	arch/blackfin/cpu/serial.o		(.text .text.*); \
+	common/dlmalloc.o		(.text .text.*); \
+	lib/crc32.o		(.text .text.*); \
+	lib/zlib.o		(.text .text.*); \
+	board/ibf-dsp561/ibf-dsp561.o	(.text .text.*); \
+	. = DEFINED(env_offset) ? env_offset : .; \
+	common/env_embedded.o		(.text .text.*);
 #endif
 
 
@@ -83,35 +111,8 @@
  * I2C Settings
  */
 #define CONFIG_SOFT_I2C		1
-#define PF_SCL			0x1/*PF0*/
-#define PF_SDA			0x2/*PF1*/
-
-#ifdef CONFIG_SOFT_I2C
-#define I2C_INIT       do { *pFIO0_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO0_DIR |= PF_SDA; *pFIO0_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO0_DIR &= ~PF_SDA; *pFIO0_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO0_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-	do { \
-		if (bit) \
-			*pFIO0_FLAG_S = PF_SDA; \
-		else \
-			*pFIO0_FLAG_C = PF_SDA; \
-		SSYNC(); \
-	} while (0)
-#define I2C_SCL(bit) \
-	do { \
-		if (bit) \
-			*pFIO0_FLAG_S = PF_SCL; \
-		else \
-			*pFIO0_FLAG_C = PF_SCL; \
-		SSYNC(); \
-	} while (0)
-#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
-#endif
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 
 
 /*
@@ -125,6 +126,4 @@
  */
 #include <configs/bfin_adi_common.h>
 
-#include <asm/blackfin-config-post.h>
-
-#endif				/* __CONFIG_IBF_DSP561__H__ */
+#endif