X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fhrcon.h;h=52e62778a3c07fbed6533c7a6cd3bd13a30b68d3;hb=87f78478a4a1bf574db0b0e575ca37cf91fb187c;hp=5574e7715a82f06dd9e180e830a5eb1f24cc5cd8;hpb=02ccab1908c405fe1449457d4a0d343784a30acb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h
index 5574e77..52e6277 100644
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
  *
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,17 +17,8 @@
 #define CONFIG_MPC8308		1 /* MPC8308 CPU specific */
 #define CONFIG_HRCON		1 /* HRCON board specific */
 
-#define	CONFIG_SYS_TEXT_BASE	0xFE000000
-
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 
-#define CONFIG_CMD_FPGAD
-#define CONFIG_CMD_IOLOOP
-
 /*
  * System Clock Setup
  */
@@ -212,8 +202,6 @@
  * FLASH on the Local Bus
  */
 #if 1
-#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER		/* use the CFI driver */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_FLASH_LEGACY_512Kx16
@@ -221,7 +209,6 @@
 
 #define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE		8 /* FLASH size is up to 8M */
-#define CONFIG_SYS_FLASH_PROTECTION	1 /* Use h/w Flash protection. */
 
 /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
@@ -282,7 +269,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX	2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -475,14 +461,12 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET	/* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII		1 /* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME	"eTSEC0"
 #define TSEC1_PHY_ADDR		1
@@ -496,7 +480,6 @@ void fpga_control_clear(unsigned int bus, int pin);
  * Environment
  */
 #if 1
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
 				 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
@@ -504,7 +487,6 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 #else
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
 #endif
 
@@ -514,23 +496,15 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PCI
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
 #define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 /*
@@ -599,7 +573,7 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
 
 
-#define CONFIG_HOSTNAME		hrcon
+#define CONFIG_HOSTNAME		"hrcon"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"