X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fhikey.h;h=003cd75baf8f5e4e17502b59d7417873581880b8;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=7a03d0f30a3273867bd64a05cc5bd8c25a2ab541;hpb=73eed452b9c9827474c0789c30729dca6fcf061d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 7a03d0f..003cd75 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2015 Linaro
  *
@@ -5,8 +6,6 @@
  *
  * Configuration for HiKey 96boards CE. Parts were derived from other ARM
  * configurations.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __HIKEY_H
@@ -19,16 +18,12 @@
 
 #define CONFIG_REMAKE_ELF
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
-#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M
 
 /* Physical Memory Map */
 
 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
-#define CONFIG_SYS_TEXT_BASE		0x35000000
 
-#define CONFIG_NR_DRAM_BANKS		6
 #define PHYS_SDRAM_1			0x00000000
 
 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
@@ -52,53 +47,25 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
 
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
-#define CONFIG_BAUDRATE			115200
-
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
-
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_MISC_INIT_R
 #endif
 
 #define CONFIG_HIKEY_GPIO
 
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_DWMMC
-#define CONFIG_HIKEY_DWMMC
-#define CONFIG_BOUNCE_BUFFER
-
-#define CONFIG_FS_EXT4
-
 /* Command line configuration */
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_ENV
-
-#define CONFIG_MTD_PARTITIONS
 
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-#include <config_distro_defaults.h>
-
 /* Initial environment variables */
 
 /*
  * Defines where the kernel and FDT will be put in RAM
  */
 
-/* Assume we boot with root on the seventh partition of eMMC */
-#define CONFIG_BOOTARGS	"console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 1) \
@@ -115,25 +82,10 @@
 				BOOTENV
 
 /* Preserve environment on sd card */
-#define CONFIG_COMMAND_HISTORY
-
 #define CONFIG_ENV_SIZE			0x1000
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE               "mmc"
-#define FAT_ENV_DEVICE_AND_PART         "1:1"
-#define FAT_ENV_FILE                    "uboot.env"
-#define CONFIG_FAT_WRITE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
-#define CONFIG_SYS_NO_FLASH
-
 #endif /* __HIKEY_H */